Analog Devices AD9779A Quick Start Manual page 5

Quick Start Guide
- When the Run
Forever control will setup the AD977
controls change.
- The DCO frequency field in the DPG
- Next hit the download
- When the vector has finished downlo
- The output from J6 should be a clean
2010
© Analog Devices, Inc. All rights reserved. Tradema
registered trademarks are the property of their respective
Figure 6 AD9779 SPI VI Panel control
button is clicked, t the SPI controller will run once. It will both write and read fro
79A, and will continue to read from the chip and will update t
GDownloader window should now be reading something clos
button. T This transfers the data from the PC to the DPG memory.
oading, hit the play
n 10MHz tone as shown below:
arks and
e owners.
D0 00000-0-1/0
AD9779A/78A
button. This starts the DPG2 transm
A/76A-DPG2-EBZ
om the AD9779A. The Run
the SPI when any of the
se to 200MHz.
mitting data to the eval board.