Technical Specifications - HMS Networks Anybus Wireless Bridge II Serial AWB3005 Startup Manual

Technical Specifications

8. Technical Specifications
Order Code AWB3005
Serial interface Serial: RS232/RS422/RS485 Baud rate: 2400 - 921600 bit/s
Data bits 5-8, stop bits 1-2, parity None, Odd, Even.
Transparent serial protocol transfer including support for Modbus-RTU and Modbus-TCP to
Modbus-RTU transparent routing.
Ethernet interface Ethernet: 10/100BASE-T with automatic MDI/MDIX auto cross-over detection. For
configuration only.
WiFi interface Wireless standards: IEEE 802.11 a, b, g, n, d.
Operation modes: Access Point or Client
Wireless LAN bands: 2.4 GHz and 5 GHz
RF output power: 18 dBm EIRP (including antenna gain 3 dBi)
Max number of Clients for Access Point: 7
Power consumption: 54mA@24VDC
Net data throughput: 20 Mbps. Link speed: max 65 Mbps (802.11n SISO)
Security: WEP 64/128, WPA, WPA-PSK and WPA2, TKIP and AES/CCMP, LEAP, PEAP including
MS-CHAP.
Bluetooth interface Wireless standards (profiles): PANU & NAP
Operation modes: Access Point or Client
RF output power: 14 dBm EIRP (including antenna gain 3 dBi)
Bluetooth conducted sensitivity: -90 dBm
Max number of slaves for Access Point: 7
Power consumption: 36 mA@24VDC
Net data throughput: ~1 Mbps
Bluetooth version support: Classic Bluetooth v2.1
Security: Authentication & Authorization, Encryption & Data Protection, Privacy &
Confidentiality, NIST Compliant, FIPS Approved
Dimensions 93 x 68 x 33 mm (H•W•D)
Weight 120 g or 0,26 lbs
Temperature Operating: -30 to +65 °C (-22 to +149 °F) Storage: -40 to +85 °C (-40 to +185°F)
Output power WiFi 18 dBm EIRP - Bluetooth 14 dBm EIRP - Bluetooth Low Energy 10 dBm EIRP
All including antenna gain 3dBi
Power supply 9-30 VDC (-5% +20%), Cranking 12 V (ISO 7637-2:2011 pulse 4). Reverse polarity protection.
SP2966 1.4
®
Anybus Wireless Bridge II Serial
AWB3015
™
Page 27 of 28