Advertisement
®
™
Anybus
Wireless Bridge II Serial
Bridge II Serial Built-In Web Interface
5.2. Bridge II Serial Built-In Web Interface
The Bridge II Serial built-in web interface is used to configure, maintain and troubleshoot
the Bridge II Serial. Parameters can be set individually or using pre-configured Easy Config
modes.
The web interface is accessed by pointing a web browser to the IP address of the unit.
The default address is 192.168.0.99.
See also
Required IP Address Settings (page
14).
The configuration settings are described in detail in the User Manual.
Figure 6. System Overview page example
Page 16 of 28
SP2966 1.4
Advertisement
Related Manuals for HMS Networks Anybus Wireless Bridge II Serial AWB3005
Related Products for HMS Networks Anybus Wireless Bridge II Serial AWB3005
- HMS Networks Anybus Wireless Bridge II CAN AWB3016-B
- HMS Networks Anybus Wireless Bolt Serial AWB2010-B
- HMS Networks Anybus Wireless Bolt LTE AWB1504
- HMS Networks Anybus Wireless Bolt LTE AWB1505
- HMS Networks Anybus Wireless Bolt LTE AWB1502-B
- HMS Networks Anybus Wireless Bolt LTE AWB1503-B
- HMS Networks AWB6000-A
- HMS Networks Anybus Wireless Bridge II CAN
Need help?
Do you have a question about the Anybus Wireless Bridge II Serial AWB3005 and is the answer not in the manual?
Questions and answers