NAC Image Technology MEMRECAM GO-12 User Manual page 73

Trigger button Trigger button
The camera is already ready to record at startup. Tap the trigger button to start recording.
The example in the figure shows that the camera can record 12.6 seconds each before and af-
ter the moment the trigger button is tapped.
It is the state of "center trigger" in our conventional product.
If the trigger is made before the hourglass mark disappears, the recording will be shorter than
the available recording time before the trigger.
(00512)
Recording time before trigger
Number of recordings
Recording time after trigger
Indicates the time remaining until the end of recording after the
trigger.
Recording time before trigger
Indicates the remaining time until all recordable recording
times before the trigger are recorded.
The memory space available for recording has run out.
To start recording, the recorded video must be deleted.
73
GO-Touch Part Descriptions