NAC Image Technology MEMRECAM GO-12 User Manual page 58

GO-Touch Part Descriptions
Common Items Common Items
To activate the setting, tap on a blank spot on the screen.
A confirmation message will appear.
Tap "OK" to change the setting.
How to change Wi-Fi SSID and Passphrase How to change Wi-Fi SSID and Passphrase
Tap each item to enter text.
Enter the item to be changed.
To activate the settings after changes have been made, please follow the instructions in "Com-
mon Items Enable changed settings?" to make the settings effective after changes are made.
Configuration Items
Wi-Fi SSID
Passphrase
The expected operation will not be achieved with settings that do not meet the
above restrictions.
In this case, it is recommended to restore the factory default settings.
(see page 35 )
The Wi-Fi SSID and Passphrase will need to be changed again to change the con-
nection to the tablet or PC after the change.
Change the Wi-Fi SSID or Passphrase of the camera registered on your tablet or PC.
It is recommended to reconnect with the QR code on the camera's e-paper.
Enable changed settings? Enable changed settings?
Input Restrictions
Only one-byte alphanumeric characters can be used.
Spaces (blanks) cannot be used.
Only one-byte alphanumeric characters can be used.
Space (blank) cannot be used.
Please set at least 8 characters.
58
(00512)