NAC Image Technology MEMRECAM GO-12 User Manual page 66

GO-Touch Part Descriptions
MotionDetect (luminance detection automatic trigger input function)
This function automatically inputs a trigger when there is a sudden change in luminance within
the metering area set by Luma. It responds quickly to changes in luminance, with a delay of
approximately one frame before the trigger is input.
Specify the area.
The example specifies the strobe's flash part.
Combined use of MotionDetect + AutoExposure
Using this function together with Luma is effective for reducing overexposure to the subject
when the luminance changes suddenly within the metering area set by the camera.
AutoExposure may not be effective for some luminance changes.
The trigger input for recording is triggered by
the strobe light.
66
(00512)