Until The Power Is Turned On - NAC Image Technology MEMRECAM GO-12 User Manual

Until the power is turned on

Connect the AC adapter or battery plate to the camera's power
connector, depending on the power source to be connected
Use AC adapter only.
(see page 28)
Connect the cable to
the camera's power
input.
A C a d a p t e r p o w e r
switch ON.
Check that POWER LED changes from lit in orange to flash in blue.
(00512)
Use battery only.
(see page 30)
Install battery
Press the camera's power button.
27

Until the power is turned on

AC adapter and battery used
together.
(see page 31)
Install the battery plate.
Install battery.
Connect AC adapter to battery
power input.
AC adapter power switch ON