NAC Image Technology MEMRECAM GO-12 User Manual page 34

Until the power is turned off
Press and hold the camera's
power button.
To shut down the camera, press and hold
the power button.
When shutdown is complete, the POWER LED
changes from flashing orange to lit orange.
Remove the battery
Remove the battery while pressing the battery release button on the battery plate.
Be sure to shut down the camera before disconnecting the external
power supply.
If the external power supply is disconnected before the shutdown is completed, the camera
may start up with data recorded the next time the camera is started.
If this happens, press and hold the camera power button to shut down the camera again.
Turn OFF the AC adapter power
switch.
Turn off the power switch on the AC adapter.
The LED on the AC adapter turns off.
34
(00512)