NAC Image Technology MEMRECAM GO-12 User Manual page 54

GO-Touch Part Descriptions
Sensor
Memory
S/N
Version
Software
Hardware
Ether IP
Address
Wi-Fi SSID
Passphrase
Domain
Band
2.4GHz
5GHz
Stealth
Clients)
Sensor type (color/monochrome)
Built-in memory
Serial number
Camera firmware version
Firmware Information
Camera Hardware Information
MANUAL: Manually configure network settings.
AUTO: Automatic network configuration is obtained (DHCP).
IP address and subnet mask of the camera's wired LAN.
Only IP address can be changed
SSID of the Wi-Fi adapter.
(Default setting: nac_GO-Camera type_CID)
Only one-byte alphanumeric characters can be set.
How do I change it? (see page 58)
Change the password for connecting to the Wi-Fi (Default: memrecam).
Only one-byte alphanumeric characters can be set.
• 8 Set more than one character.
How do I change it ? (see page 58)
Connected network domain (usually gt.nac)
Setting the frequency band of Wi-Fi adapter.
Only 2.4GHz can be used.
2.4 GHz channel.
Changing channels may improve Wi-Fi connectivity in environments with
radio interference or poor wireless conditions.
Can be set from Ch 1 to Ch 11.
How do I change it ? (see page 59)
Not used.
Turn ON/OFF the function to notify the SSID of the Wi-Fi to tablets and
other devices.
How do I change it ? (see page 59)
When using Wi-Fi, set the number of simultaneous connections for tab-
lets and other devices that can be connected ( default 20)
54
(00512)