Ruris RX PILOT 001M User Manual
  1. Manuals
  2. Brands
  3. Ruris Manuals
  4. Lawn Mower
  5. RX PILOT 001M
  6. User manual

Ruris RX PILOT 001M User Manual

Lawn mower tractor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Lawn Mower tractor RURIS RX PILOT
001M / PILOT 002H
1. INTRODUCTION _______________________________________________ 2
2. SAFETY INSTRUCTIONS _________________________________________ 2
3. TECHNICAL DATA ______________________________________________ 4
4. OVERVIEW ___________________________________________________ 5
4.1. PRECAUTIONS ______________________________________________ 7
5. UNPACKING AND ASSEMBLY _____________________________________ 8
6. INSTRUCTIONS FOR USE _______________________________________ 13
7. TROUBLESHOOTING __________________________________________ 20
8. DECLARATIONS OF CONFORMITY ________________________________ 22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RX PILOT 001M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ruris RX PILOT 001M

Summary of Contents for Ruris RX PILOT 001M

  • Page 1: Table Of Contents

    Lawn Mower tractor RURIS RX PILOT 001M / PILOT 002H 1. INTRODUCTION _______________________________________________ 2 2. SAFETY INSTRUCTIONS _________________________________________ 2 3. TECHNICAL DATA ______________________________________________ 4 4. OVERVIEW ___________________________________________________ 5 4.1. PRECAUTIONS ______________________________________________ 7 5. UNPACKING AND ASSEMBLY _____________________________________ 8 6. INSTRUCTIONS FOR USE _______________________________________ 13 7.

  • Page 2: Introduction

    Dear Client! Thank you for your decision to purchase a RURIS product and for your trust in our company! RURIS has been on the market since 1993 and during all this time it has become a strong brand, which has built its reputation by keeping promises, but also by continuous investments aimed at helping customers with reliable, efficient and quality solutions.
  • Page 3 If you notice abnormal vibrations during operation, stop the engine immediately and check the condition of the machine. h) All repairs and replacement of parts must be carried out by an authorized RURIS service center. i) Never operate the tractor with worn or damaged parts. Defective or worn parts should always be replaced, not repaired.

  • Page 4: Technical Data

    e) When working on a slope, keep the fuel tank slightly above half to minimize the risk of fuel spillage. f) Use extreme caution when operating the machine in reverse. d) Do not detach, disable, remove or modify installed safety systems/micro switches. h) Do not put your hands or feet near or under the moving parts of the machine.

  • Page 5: Overview

    4. GENERAL PRESENTATION RURIS RX PILOT 001M Lawn Mower tractor Steering wheel Seat Grass collector bag Brake pedal Gear shift lever Cutting blade coupling lever Speed variator lever/shock The pedal engages the blade in reverse Parking brake lever Cutting height adjustment...
  • Page 6 RURIS RX PILOT 002H lawn tractor Steering wheel Seat Collector bag Brake pedal Side exhaust Cutting blade coupling lever Speed variator lever/shock The pedal engages the blade in reverse Parking brake lever Cutting height adjustment lever Ignition key switch Hydrostatic transmission...

  • Page 7: Precautions

    Steering wheel installation Installation of the back plate Installing the blade engagement lever Installing the front bumper ( bull bar) Other spare parts 4.1. PRECAUTIONS 1.1 Notices Familiarize yourself with the control and proper use of the tractor. Learn how to quickly stop the engine. Failure to follow warnings and instructions may result in fire and/or serious injury.

  • Page 8: Unpacking And Assembly

    If the machine starts to vibrate abnormally: check for possible damage; Check and tighten any loose parts. All inspections, repairs and replacements are carried out by an authorized RURIS service center. Do not touch engine parts and areas that heat up during operation. There is a risk of burns.
  • Page 9 5.1. BACK PLATE ASSEMBLY Align the holes on the plate with the holes on the back of the machine and secure the plate with the nuts (M6) and screws (M6x12 and M8x25).
  • Page 10 For the Pilot 0002H model, you need to fix the rear lever with the nut (M6) as in the adjacent figure. 5.2. STEERING WHEEL INSTALLATION First insert the sleeve into the steering wheel shaft as shown in figure 1, then insert the decorative cover as shown in figure 2, insert the steering wheel and fix it...
  • Page 11 5.4. SEAT INSTALLATION Align the holes on the seat with the holes on the fixing plate, fix the seat with washers and screws (M8x20) as shown in the adjacent figure. Fix the seat to the machine with screw (M8x18) and nut (M8). 5.5.
  • Page 12 Fix part 3 and part 4 with the brackets 5, using the screw (M6x30) and nut (M6) to fix. Install part 7 using (M6x12) and nut (M6). Tighten the screw and nut as shown in the adjacent figure. Attach the grass bag to the metal frame as shown in the figure below.

  • Page 13: Instructions For Use

    Attach the bag assembly to the top cover using screws (ST5.0x30 and ST4.8x19) 5.6. ASSEMBLY OF CONTROL LEVERS Fix the levers with screw (M6x35) 6. INSTRUCTIONS FOR USE...
  • Page 14 Oil supply Before starting the engine, fill the engine with RURIS 4T-MAX oil or an API classification oil: CI-4/SL or higher. Engine oil bath capacity 0.5L Check the engine oil level with the engine stopped and upright. Lift the seat, remove the protective cover.
  • Page 15 Seat adjustment • Adjust via the screws at the bottom of the seat to select the most comfortable position. Battery cable connection • Connect the battery to the electrical system as shown in the attached figure . 6.1. Preparing the machine before starting work : The machine can be used to mow the lawn in many different ways;...
  • Page 16 6.3. Switching Sit in the operator's position (seat). Make sure the collection bag is properly installed. Place the shifter in neutral (N) as shown in the adjacent figure. (for mechanical model 001M) Cutting blade engagement lever in CLOSED "A" position. Depress the brake pedal...
  • Page 17 Set the speed/shock variator to the start position. (START) Insert the ignition key and turn it to ON for electric ignition, then turn it all the way to start the engine. Release the ignition key after the engine starts. Once the engine is started, switch the variator lever to the minimum speed position. 6.4.
  • Page 18 6.5. scale Make sure the collection bag is properly installed. Adjust the cutting height to the appropriate position. The cutting height is adjustable from 30- 75 mm, positions 1 to 6. Shift the speed variator lever to the full speed position.
  • Page 19 6.7. PARKING BRAKE Place the gear shifter in the "N" position. Depress the brake pedal to reduce speed until the tractor stops. Move the blade engagement lever to the CLOSED "A" position. Raise the parking lever to the "P" position, then release the brake pedal.

  • Page 20: Troubleshooting

    6.10. AFTER USE • Allow the engine to cool before storing it indoors. • For cleaning, connect the water hose to its connector. 6.11. Battery storage The battery must always be kept dry, at room temperature (in winter). Never expose it to low temperatures. Fully charge the battery before storage and then place the tractor in a place where it is not exposed to frost.
  • Page 21 • Safety switches are not • enable the safety switches below The machine does not start ( or the starter does activated seat and the collection bag . • The wires are not • Check if WIRES are connected not spin ENGINE then when a startup is connected to the battery.

  • Page 22: Declarations Of Conformity

    Collector bag volume : 150 l We, SC RURIS IMPEX SRL Craiova, manufacturer , in accordance with GD 1029/2008 - regarding the conditions for the introduction of cars on the market, Directive 2006/42/EC - cars ; safety and security requirements , Standard EN ISO 12100:2010 –...
  • Page 23 Directive 2000/14/CE amended by Directive 2005/88/CE and SR EN ISO 3744:2011. We, SC RURIS IMPEX SRL Craiova as a manufacturer , in accordance with Directive 2000/14/EC (amended by Directive 2005/88/EC), HG 1756/2006-regarding the limitation of the level of noise emissions in the environment produced by equipment intended for use outside the buildings, we have verified and certified the conformity of the product with the specified standards and declare that it complies with the main requirements.
  • Page 24 Collector bag volume : 150 l We, SC RURIS IMPEX SRL Craiova, manufacturer , in accordance with HG 1029/2008 - regarding the conditions for the introduction of cars on the market, Directive 2006/42/CE - cars ; safety and security requirements , Standard EN ISO 12100:2010 –...
  • Page 25 24.11.2023, in accordance with the provisions of Directive 2000/14/CE amended by Directive 2005/88/CE and SR EN ISO 3744:2011. We, SC RURIS IMPEX SRL Craiova as a manufacturer , in accordance with Directive 2000/14/EC (amended by Directive 2005/88/EC), HG 1756/2006-regarding the limitation of the level of noise emissions in the environment produced by equipment intended for use outside the buildings, we have verified and certified the conformity of the product with the specified standards and declare that it complies with the main requirements.

This manual is also suitable for:

Pilot 002h

Table of Contents