Ruris RXR300 Manual
  1. Manuals
  2. Brands
  3. Ruris Manuals
  4. Lawn Mower
  5. RXR300
  6. Manual

Ruris RXR300 Manual

Robotic lawn mower
Hide thumbs Also See for RXR300:
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Robotic lawn mower
RXR300 RXR500

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RXR300 and is the answer not in the manual?

Questions and answers

Related Manuals for Ruris RXR300

Summary of Contents for Ruris RXR300

  • Page 1 Robotic lawn mower RXR300 RXR500...

  • Page 2: Table Of Contents

    Content 1. Introduction ..................4 2. Safety instructions ................5 2 .1 Safety features of the Robotic lawn mower ............. 7 2.2 Labels on the machine ..................9 2.2 Protection against lightning ................11 3. Technical data ................12 4. General presentation ..............14 5.
  • Page 3 6.8 mowing the lawn in several areas ..............42 7. Maintenance ................. 48 8. Troubleshooting ................52 8.1 Troubleshooting: Charging station ..............52 8.2 Troubleshooting: Robotic lawn mower ............52 9. Declarations of conformity ............57...

  • Page 4: Introduction

    1. INTRODUCTION Dear Customer! Thank you for your decision to purchase a RURIS product and for your trust in our company! RURIS has been on the market since 1993 and during all this time it has become a strong brand, which has built its reputation by keeping promises, but also by continuous investments aimed at helping customers with reliable, efficient and quality solutions.

  • Page 5: Safety Instructions

    2. SAFETY INSTRUCTIONS Read the user manual carefully before use. Keep it for future reference. Instructions a. Read the instructions carefully. Familiarize yourself with the Robotic lawn mower 's commands. b. Do not allow persons unfamiliar with these instructions or children to operate the robot.
  • Page 6 2. In case of abnormal vibration, stop the Robotic lawn mower and check if the blades are damaged. Replace worn or damaged blades to maintain balance. If the vibration continues, contact an authorized RURIS service. 3. Use protective gloves when inspecting or servicing the blade.

  • Page 7: Safety Features Of The Robotic Lawn Mower

    5. Replace worn or damaged parts for your safety. 6. Use only original equipment and accessories. It is not allowed to modify the original design of the Robotic lawn mower . All modifications are done at your own risk and will void the warranty.
  • Page 8 The device's anti-theft/disable feature will prevent anyone from using the Robotic lawn mower unless they have the code. You will be prompted to enter a four-digit code of your choice to use as your personal security code. 2. Lift sensor If the Robotic lawn mower is raised from the ground more than 10 mm, the blade will immediately stop rotating.

  • Page 9: Labels On The Machine

    The Robotic lawn mower cannot operate without a perimeter wire installed and activated through the base station. If the wire is not connected correctly or is damaged, the Robotic lawn mower will stop working. 2.2 LABELS ON THE MACHINE WARNING - Read the instructions for use before using the Robotic lawn mower.
  • Page 10 Protection against splashing water CE mark The product meets the requirements and regulations established by the European Community. Protection class III Removable power supply unit Safety alert CAUTION – To reduce the risk of injury, read the user manual Protection class II 3.15A time delay fuse Short-circuit proof safety isolation transformer Main unit power switch...

  • Page 11: Protection Against Lightning

    Li-Ion batteries. Do not leave the boundary wire box behind the charging station. Do not dispose electrical equipment, industrial electronics and components in household waste! Information on WEEE. Considering the provisions of GEO 195/2005 - regarding environmental protection and GEO 5/2015. Consumers will consider the following indications for handing over electrical waste, specified below: - Consumers have the obligation not to dispose of electrical waste and electronic equipment (WEEE) as unsorted municipal waste and to collect this WEEE separately.

  • Page 12: Technical Data

    3. TECHNICAL DATA Model RXR300 RXR500 Brushless electric Brushless electric Engine type engine engine Li-ion battery voltage Li-ion battery capacity Connection type Bluetooth Charging time 80 min 80 min Work time 110 min 110 min Engine RPM 3100 rpm 3100 rpm...
  • Page 13 The Robotic lawn mower is suitable for a maximum grass height of 60 mm. In taller grass, the Robotic lawn mower may stop. Cut the lawn to less than 60mm using a brushcutter.

  • Page 14: General Presentation

    4. GENERAL PRESENTATION...
  • Page 15 1. STOP button 2. Control panel 3. Robot body 4. Rain sensor 5. Height adjustment knob 6. Front wheel 7. Disc blades 8. Rear wheel 9. Main switch 10. Battery cover 11. USB cover 12. Blades (3 pcs + 3 pcs) 13.
  • Page 16 Width Protect your pond, trees, garden furniture or flower beds with the boundary wire (Fig. 2A) Propeller cutting mode If the Robotic lawn mower comes in contact with the boundary wire more than 5 times, it will enter the 3-circle propeller mowing mode. This spiral cutting function will help improve the efficiency of mowing surface coverage.

  • Page 17: Installation Guide

    Cutting height adjustment The Robotic lawn mower has cutting height adjustment settings between 20mm and 60mm. If the grass is larger than 60 mm, cut the grass to max. 60 mm, otherwise the working load of the robot will be too high and the cutting efficiency will decrease. Use a regular brushcutter.
  • Page 18 5. The wires leading and returning to the island must be parallel and at a maximum distance of 1 cm between them, without them crossing. Therefore, fix both wires, to and from the island, using the fixing nails. (Fig.3B) 6. The minimum distance between the islands must be 1 m. Otherwise, delimit the two objects together as a single island (Fig.3C).

  • Page 19: Boundary Wire

    5.2 BOUNDARY WIRE If you plan to aerate your garden lawn, choose one of the two installation methods for the boundary wire: you can combine both installation methods. - Ground installation Attach the boundary wire to the lawn with the nail adjuster. This makes it possible to adjust the boundary wire during the first weeks of operation.
  • Page 20 Important! Hard or dry soil can cause the nails to break when you drive them in. Water the lawn if it is very dry before installing the boundary wire. Note: A cut boundary wire is not covered by warranty. Installation of the wire in the corners Avoid placing the perimeter wire at right angles (90°) in the corners.
  • Page 21 Important! When the Robotic lawn mower approaches any boundary wire, the sensors installed at the front of the robot will detect it, but before it turns, the Robotic lawn mower will exceed the boundary by about 30 cm, so please note these information when you create the mowing perimeter.
  • Page 22 Fig 7. - Trees The robot treats trees as normal obstacles, but if some tree roots are exposed in your garden and are smaller than 100mm, this area must be protected to prevent damage to the tree root, cutting blades or rear wheels. (Fig. 8) Fig 8.
  • Page 23 Slope The Robotic lawn mower is capable of climbing slopes of up to 35% (20*), so avoid steeper areas. (Fig. 10) How to calculate the slope of your lawn (Fig.11) Placement of boundary wire on slopes The upper boundary wire must not be placed on slopes steeper than 35% (20°). It must have a distance of at least 30 cm between any obstacle.

  • Page 24: Charging Station

    Note: The lower boundary wire cannot be placed on a slope steeper than 17% because the Robotic lawn mower will slide off the wire when going down the slope, especially when the grass is wet. Figure 12 5.3 CHARGING STATION First, find the best position for your charging station, consider the nearest outdoor outlet, as the station must be connected to it.
  • Page 25 distance of at least 1 m from the rear end to the corner of the perimeter. Choose a shaded location to install the charging station, because a lower temperature during charging is beneficial for the battery (Fig.16A) When you start fixing the boundary wire, first leave about 1 meter of extra wire for later adjustment, then fix it along the perimeter.
  • Page 26 Location of charging station After work, when the battery voltage is low, the Robotic lawn mower will automatically return to the charging station by following the boundary wire counterclockwise. After a full recharge, the robot will start again with its next cutting sequence (if within the set working time window) (Fig.17A).

  • Page 27: Protective Cover Of The Charging Station

    5.4 PROTECTIVE COVER OF THE CHARGING STATION Components Amount Protective cover Screw Support Allen key Fixing screw...
  • Page 28 Assembly 1. Connect the protective cover on the supports with four screws and nuts (Fig.1) 2. Secure the stand to the charging station with the four fixing screws. (Fig. 2) Fig.1 Fig.2 Note The area of the charging station must be flat, it is not allowed to have ponds, swimming pools or stairs near the charging station.
  • Page 29 Before plugging in the charging station, complete all installation work on the boundary wire. Prepare the boundary wire for the charging station After mounting the boundary wire, you need a stripping device (Fig. 18A). Remove the insulation of the wire for a length of 10-15 mm to connect it to the charging station (Fig.18B).
  • Page 30 220-240V~50/60Hz. 2. Plug the charger directly into an electrical outlet. Do not strain or pull on the power cord. 3. Do not use a damaged charger. Replace damaged wires or charger immediately at an authorized RURIS service.
  • Page 31 4. Do not charge in wet places. Do not charge in temperatures above 45 ℃ or below 0 ℃ 5. Keep the Robotic lawn mower and its charger away from water, heat emitters or chemicals. Be careful not to damage the charger cable, keep it away from sharp edges. 6.
  • Page 32 Fig. 20C Fig. 20D After making these connections, connect the charger to the power source. There is an LED indicator on the charging station – after proper installation, it should be flashing green. If the LED is off, check the power connections first. If the LED is on but not steady green, see the troubleshooting guide below (Fig.21).

  • Page 33: Charging Information

    Figure 21 5.4 CHARGING INFORMATION The Robotic lawn mower will return to the charging station in one of the following situations: 1. If you press the “Home” button and OK. 2. Battery capacity is at low voltage. Note: If the Robotic lawn mower , for some reason, cannot return to the charging station, it will try again, returning to the lawn area.

  • Page 34: Starting The Robotic Lawn Mower And Testing The Installation

    5.5 STARTING THE ROBOTIC LAWN MOWER AND TESTING THE INSTALLATION Once the LED is solid green, you have a work area for the Robotic lawn mower . Now please check first that both ends of the boundary wire are connected. Now place the robot in the work area next to the charging station.
  • Page 35 Robot Figure 23 STOP function If you want to stop the Robotic lawn mower during work, press the STOP button. Once the STOP button is pressed, the Robotic lawn mower will stop and wait for further commands. Fastening the charging station Once the Robotic lawn mower is working normally and the charging station is in the right location, use a hammer and fully tap the 6 fixing nails to secure the base of the station.

  • Page 36: Commissioning

    6. COMMISSIONING 6.1 CONTROL PANEL Robot Definitions and LED Lights: Power Key: Make sure the main power switch is pressed "ON". Then press the Power key to turn the Robotic lawn mower on or off. OK key: Selects a specific function or setting. Battery icon: Shows battery status.

  • Page 37: Starting The Robotic Lawn Mower

    Start key/ key number "2". Home key/ key number "3". Lock key/ key number "4". Timekeeper indicators Lock and power indicator 6.2 STARTING THE ROBOTIC LAWN MOWER 1. Press the main power switch "ON" 2. Press the power key, the lock and power indicator will turn red, and the battery and alert icons will flash alternately.

  • Page 38: Setting Working Time

    If you want to lock the control panel, press the lock key. 4. Press START and OK, the robot will start. Note: If the battery level is above 30%, the Battery icon will be green. The Robotic lawn mower will operate normally. When the battery level is less than 30%, the battery icon will turn red and the Robotic lawn mower will automatically return to the charging station to charge.

  • Page 39: Change Of Pin Code

    Note: Under normal operation, if you press the red "STOP" button on the top of the robotic lawnmower and then press the "HOME" button on the keyboard, the Robotic lawn mower will return to the charging station regardless of the level of battery charging. 6.5 CHANGE OF PIN CODE The original factory PIN is "1-2-3-4", you can change it as follows: 1.

  • Page 40: Firmware Update

    5. Remove the USB flash drive, use a computer to open the TEXT file saved in it. There is a PUK number in the TEXT file. This is your personal unlock code. Contact RURIS service to get the new PIN.

  • Page 41: Rain Sensor

    Via USB flash drive to update the firmware: Step 1: Download the latest Robotic lawn mower software from our RURIS support site to a USB flash drive. Step 2: Open the USB cover and insert the USB flash drive into the USB port shown below Step 3: Press the switch to "ON".

  • Page 42: Mowing The Lawn In Several Areas

    Then it will be fully charged. After charging, it will stay in the charging station for an additional 2 hours before restarting. Note: Do not short circuit the two metal sensors on the robot. This will cause the robot to operate abnormally.
  • Page 43 Area2_Per: (second area _Percent) Sets the proportion of the secondary area in relation to the whole area. Area2_Dis: (second area _Distance) It sets the distance (in meters) the Robotic lawn mower needs to reach the secondary zone, following the boundary wire. It is recommended to measure the distance in the middle of the second zone, so that you can be sure that the robot will be in the second zone when it starts mowing.
  • Page 44 The Robotic lawn mower will operate as below every 10 work cycles: Randomly 5 times, it will start mowing grass immediately after leaving the charging station. Randomly 3 times, it will move behind the charging station, moving 40 meters along the boundary wire, then start mowing the grass.
  • Page 45 Alert icon FAULTS Steady red The Robotic lawn mower is stuck The Robotic lawn mower is lifted off the ground Hall error Flashing red Boundary wire signal error Steady blue Battery error Flashing blue PCB overheating Abnormal battery temperature Engine overcurrent/engine fault Flipping / Tilting the Robotic lawn mower .
  • Page 46 Boundary / perimeter signal error If the boundary signal is wrong - for example, the Robotic lawn mower is outside the working area, the boundary wire is wrongly connected or broken, the robot will go back in a circle looking for the boundary signal and stop. If this happens, please make sure the Robotic lawn mower is in the work area and check that the LED indicator on the charging station is solid green.
  • Page 47 Please check the rear wheels and cutting blade, see if they are blocked by anything, clean, and restart the Robotic lawn mower . If it cannot start, please contact the authorized RURIS service. Flipping / Tilting the Robotic lawn mower .

  • Page 48: Maintenance

    Careful! Do not wash the Robotic lawn mower with water jets. Follow these maintenance instructions for a long Robotic lawn mower life. Consider taking your product to an authorized RURIS service center for a complete cleaning, testing and tuning of all functions, replacement of worn spare parts and software upgrades.
  • Page 49 4. Unplug the charger from the power outlet. 5. Disconnect the charger/power source from the charging station. 6. Disconnect the boundary wire connections from the charging station. The boundary wire can be left outside in the winter, but make sure the connections are protected to prevent corrosion.
  • Page 50 WARNING! Make sure the Robotic lawn mower is completely stopped and wear protective gloves before cleaning, adjusting or replacing blades. To ensure maximum cutting efficiency and safety, always use replacement blades and original blade spare parts recommended by the manufacturer when replacing them. There are three blades on the Robotic lawn mower that are mounted on the disc.
  • Page 51 2. Press the lock button and remove the battery from its case. 3. Replace the battery. 4. Insert the battery into the box and make sure it clicks into place. 5. Close the battery cover. Battery cover...

  • Page 52: Troubleshooting

    8. TROUBLESHOOTING 8.1 TROUBLESHOOTING: CHARGING STATION Light Description Solution Light off No power supply Check the power supply Steady green light Ready to work (Battery fully charged, Correct connection Boundary wire OK) Flashing green Boundary wire broken or wrongly Swap the two ends of the connected wires / check if the boundary wire is broken...
  • Page 53 There are metal parts parts if necessary. cannot pass solid red between the magnets Take the device to an the self-check and the deck. authorized RURIS of the service program, it cannot be started The Robotic The alert Limited signal error.
  • Page 54 The battery has charging pins if reached the end of necessary. its life. Replace the battery. The Robotic The alert 1. In the summer lawn mower icon is overtemperature season, please set the returns to the flashing blue If the PCB is working time early in station and overheated, the...
  • Page 55 Make sure the main power switch is "ON" for the battery to be charged. 5. Contact an authorized RURIS service. The Robotic If the charging station 1. Make sure the LED lawn mower is not installed...
  • Page 56 4. Level the ground below the charging station. The Robotic High power cable Check for a high power lawn mower close to or below the cable near or under the turns in circles boundary wire affects boundary wire; change along the the boundary signal.

  • Page 57: Declarations Of Conformity

    Description of the machine: ROBOTIC LAWN MOWER has the role of performing grass cutting work. Serial number: from XX RXR300 0001 to XX RXR300 9999 (Where xx represents the last two digits of the year of manufacture) Product: Robotic lawn mower...
  • Page 58 60335-2-29:2005/A11:2019/ 60335-2-29:2004/A11:2018- Electrical appliances for household use and similar purposes. Security. Part 2-29: Particular requirements for battery chargers SR EN 60335-1:2012/A2:2019/ EN 60335-1:2012/A2:2019- Electrical appliances for household use and similar purposes. Security. Part 2-1: General requirements SR EN 60335-1:2012/A15:2021/ EN 60335-1:2012/A15:2021- Electrical appliances for household use and similar purposes.
  • Page 59 Validity period: 10 years from the date of approval. Place and date of issuance: Craiova, 07.12.2022 Year of application of the CE marking: 2022 No. reg: 1399/07.12.2022 Authorized person and signature: Eng. Stroe Marius Catalin General Manager of SC RURIS IMPEX SRL...
  • Page 60 Description of the machine: ROBOTIC LAWN MOWER has the role of performing grass cutting works. Serial number: from XX RXR300 0001 to XX RXR300 9999 (Where xx represents the last two digits of the year of manufacture) Product: Robotic lawn mower...
  • Page 61 Engine: electric Working width : 180 mm We, SC RURIS IMPEX SRL Craiova, manufacturer, in accordance with HG 1029/2008 - regarding the conditions for the introduction of cars on the market, Directive 2006/42/EC - safety and security requirements, Standard EN ISO 12100:2010 - Cars. Security, Directive...
  • Page 62 SR EN 61960-3:2017/ EN 61960-3:2017- Alkaline accumulators and other accumulators with non-acid electrolyte - Lithium accumulators for portable applications. Part 3: Lithium parallelepiped and cylindrical cells and cells 60335-2-29:2005/A11:2019/ 60335-2-29:2004/A11:2018- Electrical appliances for household use and similar purposes. Security. Part 2-29: Particular requirements for battery chargers SR EN 60335-1:2012/A2:2019/ EN 60335-1:2012/A2:2019- Electrical appliances for household use and similar purposes.
  • Page 63 Validity period: 10 years from the date of approval. Place and date of issuance: Craiova, 07.12.2022 Year of application of the CE marking: 2022 No. reg: 1397/07.12.2022 Authorized person and signature: Eng. Stroe Marius Catalin General Manager of SC RURIS IMPEX SRL...
  • Page 64 704032121214-00 from 15.08.2022 in accordance with the provisions of 107:2015/A2:2020 We, SC RURIS IMPEX SRL Craiova as a producer, according with HG 1029/2008 - regarding the conditions for the introduction of cars on the market, Directive 2006/42/EC - safety and security requirements, Standard EN ISO 12100:2010 - Cars.

This manual is also suitable for:

Rxr500

Table of Contents