Ruris RXR1550 Manual
  1. Manuals
  2. Brands
  3. Ruris Manuals
  4. Lawn Mower
  5. RXR1550
  6. Manual

Ruris RXR1550 Manual

Robotic lawn mower
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EN
Robotic lawn mower
RXR1550

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RXR1550 and is the answer not in the manual?

Questions and answers

Related Manuals for Ruris RXR1550

Summary of Contents for Ruris RXR1550

  • Page 1 Robotic lawn mower RXR1550...

  • Page 2: Table Of Contents

    Content 1. Introduction ..................4 2. Safety instructions ................5 2 .1 Safety features of the robotic lawn mower ......7 2.2 Labels on the machine ..............9 2.2 Protection against lightning ............ 11 3. Technical data ................12 4. General presentation ..............14 5.
  • Page 3 6.4 Time Setting ................39 6.5 Setting working time ............... 40 6.6 WIFI setting ................41 6.7 Firmware Update ..............42 6.8 Rain sensor ................43 6.9 Mowing the lawn in several areas .......... 44 7. Alert Information ................47 8.

  • Page 4: Introduction

    1. INTRODUCTION Dear Customer! Thank you for your decision to purchase a RURIS product and for your trust in our company! RURIS has been on the market since 1993 and during all this time it has become a strong brand, which has built its reputation by keeping promises, but also by continuous investments aimed at helping customers with reliable, efficient and quality solutions.

  • Page 5: Safety Instructions

    2. SAFETY INSTRUCTIONS Read the user manual carefully before use. Keep it for future reference. Instructions a. Read the instructions carefully. Familiarize yourself with the robotic lawn mower's commands. b. Do not allow persons unfamiliar with these instructions or children to operate the robot.
  • Page 6 2. In case of abnormal vibration, stop the robotic lawn mower and check if the blades are damaged. Replace worn or damaged blades to maintain balance. If the vibration continues, contact an authorized RURIS service. 3. Use protective gloves when inspecting or servicing the blade.

  • Page 7: Safety Features Of The Robotic Lawn Mower

    5. Replace worn or damaged parts for your safety. 6. Use only original equipment and accessories. It is not allowed to modify the original design of the robotic lawn mower. All modifications are done at your own risk and will void the warranty.
  • Page 8 The device's anti-theft/disable feature will prevent anyone from using the robotic lawn mower unless they have the code. You will be prompted to enter a four-digit code of your choice to use as your personal security code. 2. Lift sensor If the robotic lawn mower is raised from the ground more than 10 mm, the blade will immediately stop rotating.

  • Page 9: Labels On The Machine

    The robotic lawn mower cannot operate without a perimeter wire installed and activated through the base station. If the wire is not connected correctly or is damaged, the robotic lawn mower will stop working. 2.2 LABELS ON THE MACHINE WARNING - Read the instructions for use before using the robotic lawn mower. The robotic lawn mower can be dangerous if used incorrectly.
  • Page 10 Protection against splashing water CE mark The product meets the requirements and regulations established by the European Community. Protection class III Removable power supply unit Safety alert CAUTION – To reduce the risk of injury, read the user manual Protection class II 3.15A time delay fuse Short-circuit proof safety isolation transformer Main unit power switch...

  • Page 11: Protection Against Lightning

    volt Do not expose to rain or wet conditions. Li-Ion batteries. Do not leave the boundary wire box behind the charging station. Do not dispose electrical equipment, industrial electronics and components in household waste! Information on WEEE. Considering the provisions of GEO 195/2005 - regarding environmental protection and GEO 5/2015.

  • Page 12: Technical Data

    3. TECHNICAL DATA Engine type Brushless electric engine Li-ion battery voltage Li-ion battery capacity 5 Ah Connection type Bluetooth, Wi-Fi Charging time 180 min Work time 260 min Engine speed 3100 rpm Cutting width 180 mm Cutting height 20mm-60mm Blade type 3-edged blade Maximum climb angle 20°...
  • Page 13 The robotic lawn mower is suitable for a maximum grass height of 60 mm. In taller grass, the robotic lawn mower may stop. Cut the lawn to less than 60mm using a brushcutter.

  • Page 14: General Presentation

    4. GENERAL PRESENTATION...
  • Page 15 1. STOP button 2. Control panel 3. Robot body 4. Rain sensor 5. Height adjustment knob 6. Front wheel 7. Disc blades 8. Rear wheel 9. Main switch 10. Battery cover 11. USB cover 12. Blades (3 pcs + 3 pcs) 13.
  • Page 16 Width Protect your pond, trees, garden furniture or flower beds with the boundary wire (Fig. 2A) Propeller cutting mode If the robotic lawn mower comes in contact with the boundary wire more than 5 times, it will enter the 3-circle propeller mowing mode. This spiral cutting function will help improve the efficiency of mowing surface coverage.

  • Page 17: Installation Guide

    Cutting height adjustment The robotic lawn mower has cutting height adjustment settings between 20mm and 60mm. If the grass is larger than 60 mm, cut the grass to max. 60 mm, otherwise the working load of the robot will be too high and the cutting efficiency will decrease. Use a regular brushcutter.
  • Page 18 5. The wires leading and returning to the island must be parallel and at a maximum distance of 1 cm between them, without them crossing. Therefore, fix both wires, to and from the island, using the fixing nails. (Fig.3B) 6. The minimum distance between the islands must be 1 m. Otherwise, delimit the two objects together as a single island (Fig.3C).

  • Page 19: Boundary Wire

    5.2 BOUNDARY WIRE If you plan to aerate your garden lawn, choose one of the two installation methods for the boundary wire: you can combine both installation methods. - Ground installation Attach the boundary wire to the lawn with the nail adjuster. This makes it possible to adjust the boundary wire during the first weeks of operation.
  • Page 20 Important! Hard or dry soil can cause the nails to break when you drive them in. Water the lawn if it is very dry before installing the boundary wire. Note: A cut boundary wire is not covered by warranty. Installation of the wire in the corners Avoid placing the perimeter wire at right angles (90°) in the corners.
  • Page 21 Important! When the robotic lawn mower approaches any boundary wire, the sensors installed at the front of the robot will detect it, but before it turns, the robotic lawn mower will exceed the boundary by about 30 cm, so please note these information when you create the mowing perimeter.
  • Page 22 Fig 7. - Trees The robotic lawn mower treats trees as normal obstacles, but if some tree roots are exposed in your garden and are smaller than 100mm, this area must be protected to prevent damage to the tree root, cutting blades or rear wheels. (Fig. 8) Fig 8.
  • Page 23 Slope The robotic lawn mower is capable of climbing slopes of up to 35% (20*), so avoid steeper areas. (Fig. 10) How to calculate the slope of your lawn (Fig.11) Placement of boundary wire on slopes The upper boundary wire must not be placed on slopes steeper than 35% (20°). It must have a distance of at least 30 cm between any obstacle.

  • Page 24: Charging Station

    Note: The lower boundary wire cannot be placed on a slope steeper than 17% because the robotic lawn mower will slide off the wire when going down the slope, especially when the grass is wet. Figure 12 5.3 CHARGING STATION First, find the best position for your charging station, consider the nearest outdoor outlet, as the station must be connected to it.
  • Page 25 distance of at least 1 m from the rear end to the corner of the perimeter. Choose a shaded location to install the charging station, because a lower temperature during charging is beneficial for the battery (Fig.16A) When you start fixing the boundary wire, first leave about 1 meter of extra wire for later adjustment, then fix it along the perimeter.
  • Page 26 Location of charging station After work, when the battery voltage is low, the robotic lawn mower will automatically return to the charging station by following the boundary wire counterclockwise. After a full recharge, the robot will start again with its next cutting sequence (if within the set working time window) (Fig.17A).

  • Page 27: Protective Cover Of The Charging Station

    5.4 PROTECTIVE COVER OF THE CHARGING STATION components Amount Protective cover Screw Support Allen key Fixing screw...
  • Page 28 Assembly 1. Connect the protective cover on the supports with four screws and nuts (Fig.1 ) 2. Secure the stand to the charging station with the four fixing screws. (Fig. 2) Fig.1 Fig.2 Note The area of the charging station must be flat, it is not allowed to have ponds, swimming pools or stairs near the charging station.
  • Page 29 Before plugging in the charging station, complete all installation work on the boundary wire. Prepare the boundary wire for the charging station After mounting the boundary wire, you need a stripping device (Fig. 18A). Remove the insulation of the wire for a length of 10-15 mm to connect it to the charging station (Fig.18B).
  • Page 30 2. Plug the charger directly into an electrical outlet. Do not strain or pull on the power cord. 3. Do not use a damaged charger. Replace damaged wires or charger immediately at an authorized RURIS service. 4. Do not charge in wet places. Do not charge in temperatures above 45 ℃ or below 0 ℃...
  • Page 31 5. Keep the robotic lawn mower and its charger away from water, heat emitters or chemicals. Be careful not to damage the charger cable, keep it away from sharp edges. 6. Connect the charger to the charging station. Align the arrow on the power cable connector of the charging station with the arrow on the charger connector, insert the connector into each other, and then tighten the nut (Fig.20A/Fig.20B).
  • Page 32 Fig. 20C Fig. 20D After making these connections, connect the charger to the power source. There is an LED indicator on the charging station – after proper installation, it should be flashing green. If the LED is off, check the power connections first. If the LED is on but not steady green, see the troubleshooting guide below (Fig.21).

  • Page 33: Charging Information

    Figure 21 5.4 CHARGING INFORMATION The robotic lawn mower will return to the charging station in one of the following situations: 1. If you press the “Home” button and OK. 2. Battery capacity is at low voltage. Note: If the robotic lawn mower, for some reason, cannot return to the charging station, it will try again, returning to the lawn area.

  • Page 34: Starting The Robotic Lawn Mower And Testing The Installation

    5.5 STARTING THE ROBOTIC LAWN MOWER AND TESTING THE INSTALLATION Once the LED is solid green, you have a work area for the robotic lawn mower. Now please check first that both ends of the boundary wire are connected. Now place the robot in the work area next to the charging station. Push the main power switch to "ON"...
  • Page 35 Figure 23 STOP function If you want to stop the robotic lawn mower during work, press the STOP button. Once the STOP button is pressed, the robotic lawn mower will stop and wait for further commands. Fastening the charging station Once the robotic lawn mower is working normally and the charging station is in the right location, use a hammer and fully tap the 6 fixing nails to secure the base of the station.

  • Page 36: Commissioning

    6. COMMISSIONING 6.1. CONTROL PANEL Definitions, buttons and LED lights: Power Button: Make sure the main power switch is “ON”. Then press the Start key to start or stop the robotic lawn mower. OK button: To confirm a specific function or setting. Working time button/ key number "1"/WIFI setting.

  • Page 37: Starting The Robotic Lawn Mower

    Start button/ key number "4"/ "Up" Lock indicator. Battery icon. Wifi indicator. Business day indicator. Digital indicator 6.2 STARTING THE ROBOTIC LAWN MOWER 1. Press the main power switch "ON". 2. Press "start button" , all the LEDs on the screen light up for 3 seconds. 3.

  • Page 38: Change Of Pin Code

    5. If you also press the OK key, the robotic lawn mower will return to the charging station along the boundary wire. Note: When the battery voltage is low, the robotic lawn mower will automatically return to the charging station to charge. 6.

  • Page 39: Time Setting

    1. Open the USB cover, insert the USB flash drive into the USB port shown below. 2. Turn the main power switch to "ON". 3. Press the power key and the OK key at the same time. 4. Press the Set working time key / key number "1" 5.

  • Page 40: Setting Working Time

    2. Press the "Set Time" button , the digital indicator enters the time setting interface, the set number will flash. For example, set "14:08", press "Up" "Down" to choose the correct number, if the two left digits show "14" flashing, press the OK key.

  • Page 41: Wifi Setting

    2. Press the "Set working time" button , the digital indicator screen will enter the working time setting interface, then the “week indicator” will flash, press to choose the correct week number, then press the OK key. The week indicator stops flashing.

  • Page 42: Firmware Update

    4. If the setting is done successfully, the wifi indicator light and the robotic lawn mower will emit a sound. After the setting is completed, the digital screen will enter the "IDLE" interface. If the connection failed, press the wifi setting button to exit the setting. Please refer to APP guide for detailed information about wifi setting.

  • Page 43: Rain Sensor

    Step 1: Download the latest robotic lawn mower software from our RURIS support site to a USB flash drive. Step 2: Open the USB cover and insert the USB flash drive into the USB port shown below. Step 3: Press the power switch to "ON". Press the power key and OK at the same time.

  • Page 44: Mowing The Lawn In Several Areas

    Note: Do not short circuit the two metal sensors on the robotic lawn mower. This will cause the robotic lawn mower to operate abnormally. If you want the robotic lawn mower to work in the rain, you can change the error setting through the app, please refer to the wireless connection guide of the app.
  • Page 45 Area2_Per: (second area _Percent) Sets the proportion of the secondary area in relation to the whole area. Area2_Dis: (second area _Distance) It sets the distance (in meters) the robotic lawn mower needs to reach the secondary zone, following the boundary wire. It is recommended to measure the distance in the middle of the second zone, so that you can be sure that the robotic lawn mower will be in the second zone when it starts mowing.
  • Page 46 The robotic lawn mower will operate as below every 10 work cycles: Randomly 5 times, it will start mowing grass immediately after leaving the charging station; Randomly 3 times, it will move behind the charging station, moving 40 meters along the boundary wire, then start mowing the grass.

  • Page 47: Alert Information

    7. ALERT INFORMATION The digital indicator screen will display the robotic lawn mower fault information listed below: Display Error Limit signal error The robotic lawn mower is raised Obstacle error Main board error Battery error Hall error Engine failure Battery error Tilt error Rollover error PCB over temperature...
  • Page 48 • incorrectly connected wire or • wire loose from charging station connectors 2. The robotic lawn mower is raised from the ground If the lift sensors are continuously activated for ten seconds, the robotic lawn mower will stop and the alert LED will be RED. Please press OK to restart. If this error message appears often, please check if there are obstacles higher than 100 mm in the work area.
  • Page 49 E8. Please check the rear wheels and cutting blade. If they are stuck, clean them. Press the main power switch and then try to restart the robotic lawn mower. If the robotic lawn mower cannot start, please contact a RURIS authorized service. 8.Battery error when charging If the robotic lawn mower is on station and the battery is not fully charged within the scheduled working time, the battery is worn or defective, the display will show "E9".
  • Page 50 9. Tilt error If the robotic lawn mower is tilted upwards from any side to, it will stop and display the information: "EA". Please return the robotic lawn mower to the normal position, press OK to restart. 10. Rollover error If the robotic lawn mower is overturned, it will stop and display: "EB".

  • Page 51: Maintenance

    Careful! Do not wash the robotic lawn mower with water jets. Follow these maintenance instructions for a long robotic lawn mower life. Consider taking your product to an authorized RURIS service center for a complete cleaning, testing and tuning of all functions, replacement of worn spare parts and software upgrades.
  • Page 52 Long periods of non-use as well as extreme temperatures (direct sunlight on the robotic lawn mower or winter outside) will significantly limit battery life. Therefore, please protect your robotic lawn mower from extreme temperatures, take the battery in winter and fully charge it from time to time.
  • Page 53 Cleansing the body Use a soft brush and/or cloth dampened with household detergent. Cleaning the underside Make sure the power switch is in the OFF position and wear protective gloves. Turn the robotic lawn mower on its side to expose its underside, clean the blade disc and frame using a soft brush or damp cloth.
  • Page 54 Battery replacement 1. Open the battery cover. 2. Press the lock button and remove the battery from its case. 3. Replace the battery. 4. Insert the battery into the box and make sure it clicks into place. 5. Close the battery cover. Battery cover...

  • Page 55: Troubleshooting

    9. TROUBLESHOOTING 9.1 TROUBLESHOOTING: CHARGING STATION Light Description Solution Light off No power supply Check the power supply Steady green light Ready to work (Battery fully charged, Correct connection Boundary cable OK) Flashing green Boundary wire broken or wrongly Swap the two ends of the connected wires / check if the boundary wire is broken...
  • Page 56 The robotic The digital There are metal Remove the metal lawn mower display parts between the parts if necessary. cannot pass shows: E6 magnets and the Take the device to an the self-check deck. authorized RURIS of the service.
  • Page 57 program, it cannot be started The robotic The digital Engine overcurrent 1. Check if the grass is lawn mower display or engine fault, it has too tall stopped in tall shows: stopped due to too Cut the grass to less grass E8/EE much current in the...
  • Page 58 PIN code and an authorized RURIS turn on the robotic service lawn mower 4. If the robotic lawn mower is still off,...
  • Page 59 cannot enter installed correctly, charging station is the charging the robotic lawn steady green. station mower cannot enter 2. Check that the boundary wire under and in front of the charger is aligned. 3. Check that the charging station is positioned correctly.

  • Page 60: Declarations Of Conformity

    Description of the machine: ROBOTIC LAWN MOWER has the role of performing grass cutting work. Serial number: from XX RXR1550 0001 to XX RXR1550 9999 (Where xx represents the last two digits of the year of manufacture) Product: robotic lawn mower...
  • Page 61 60335-2-29:2005/A11:2019/ 60335-2-29:2004/A11:2018- Electrical appliances for household use and similar purposes. Security. Part 2-29: Particular requirements for battery chargers SR EN 60335-1:2012/A2:2019/ EN 60335-1:2012/A2:2019- Electrical appliances for household use and similar purposes. Security. Part 2-1: General requirements SR EN 60335-1:2012/A15:2021/ EN 60335-1:2012/A15:2021- Electrical appliances for household use and similar purposes.
  • Page 62 Validity period: 10 years from the date of approval. Place and date of issuance: Craiova, 07.12.2022 Year of application of the CE marking: 2022 No. reg: 1395/07.12.2022 Authorized person and signature: Eng. Stroe Marius Catalin General Manager of SC RURIS IMPEX SRL...
  • Page 63 Description of the machine: ROBOTIC LAWN MOWER has the role of performing grass cutting work. Serial number: from XX RXR1550 0001 to XX RXR1550 9999 (Where xx represents the last two digits of the year of manufacture) Product: robotic lawn mower...

Table of Contents