Hypertherm Powermax45 SYNC Getting Started Manual page 8

Getting Started Guide
2. Pull the torch trigger one time to get the warning puffs of air.
The plasma power supply makes a pressure release sound with each puff of air and the torch
LED changes to green.
3. Pull the torch trigger again to fire a plasma arc.

A pilot arc occurs when the torch is fired but the plasma
arc is not in contact with the workpiece. Frequent pilot
arcs cause the nozzle in the cartridge to wear more
quickly.
Adjust the output amperage if necessary
The output amperage is set automatically. If necessary, you can change it using the amperage
adjustment button
power supply.
Unlock the torch before you change the amperage setting.
1
8
on the SmartSYNC hand torch or the adjustment knob
1
English Revision 0 811520MU Getting Started Guide
on the plasma
2
2
Powermax45 SYNC