SSV Works SS-USP65 Quick Start Manual

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against
defects in material or workmanship. All SSV Works Electronics are covered by a
limited 1 year warranty against defects in material or workmanship. All SSV Works
Speakers are covered by a limited 1 year warranty against defects in material or
workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
- T-30 Torx Driver
PARTS LIST IMAGES
1. Side Panel Speaker Pods
INSTALLATION NOTES
For ease of installation, we recommend using SSV Works A6 speakers. Tilt the seats forward to gain access to the side panels.
A. Secure the speaker to the speaker panel by using the
provided #7 screws and hand tighen down.
- Wire Crimpers - Wire Strippers
2. M6 x 16mm Screws x 4
- #2 Phillips Screwdriver
3. M6 Washers x 4
A
B. Remove highlighted hardware. Depending on model year,
the amount/style of hardware may vary (torx screws and or
push pins).
SSV Works 6.5" Side Speaker Panel
for Polaris Slingshot
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
- Push-pin removal tool
4. #7 Screws x 8
SS-USP65
B