SSV Works WP-RZF3O4 Quick Start Manual

SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against defects
in material or workmanship. All SSV Works Electronics are covered by a limited 1 year
warranty against defects in material or workmanship. All SSV Works Speakers are
covered by a limited 1 year warranty against defects in material or workmanship. Labor
for replacement of defective components is not covered. Contact SSV Works for further
warranty information.
TOOLS NEEDED FOR INSTALLATION
- Wire Crimpers
- Wire Strippers
PARTS LIST IMAGES
1. WP-RZF3O4
5. Fuse Holder with Fuse
INSTALLATION NOTES
To make wiring easier, locate the battery in the vehicle before beginning the installation. The use of a thread locker is recommended on all
screws to prevent loosening due to vibration.
- 13mm Wrench for Battery
Terminal
- #3 Phillips Screwdriver
2. M6 x 1.0 Screws x 12
9. Crimp on ring terminal
4 Seat RZR XP1000 & 2015+ RZR900
4 Speaker Overhead WP System
Please read and understand these
!
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
PARTS LIST
1. WP-RZF3O4 x 1
2. M6 x 1.0 Screws x 12
3. M6 Washers x 12
4. Mounting Brackets x 2
3. M6 Washers x 12
10. Zip ties
WP-RZF3O4
5. Fuse Holder with Fuse
6. Crimp on ring terminal
7. Zip Ties
4. Mounting Brackets x 2