WORKING PRINCIPLE
E
OMEGA 10:1 EXT is a high pressure pneumatic pump used for
extrusion and transferring of high viscosity products.
OMEGA pump is essentially constituted of an air motor and a
structure called «material pumping group» or simply «pumping
group».
In the pneumatic motor, compressed air causes the vertical
reciprocating movement of the motor piston; this movement is
Connection sleeve
Lubrificant cup
Ring gasket press
ED. 02 - 02/2024 - Cod. 150210
transmitted through a connecting rod to the material pumping
piston ending with a shovel plate allowing to suck very visous
products.
The ratio 10:1 means that the outlet pressure of material is 10
times higher than the pump feed air pressure.
Pump feed air intel
EN
OMEGA 10:1 EXT
7
Need help?
Do you have a question about the OMEGA 10:1 EXT and is the answer not in the manual?