Ingenico Move5000 Quick Start Manual

Hide thumbs Also See for Move5000:

Download this manual

Move5000 Quick Reference Guide

Turning on

1. Sit the terminal on the base and hold down

the ENTER key

Turning off

1. Remove terminal from the base and hold down the FUNC and

CLEAR keys at the same time until the screen shows "SHUT

DOWN IN PROGRESS"

Purchase

1. Press F1 and then enter in the purchase amount and press

ENTER

2. Present customer card

3. Customer selects account and enters pin

Cash Out

1. Press F2 and then enter in the cash amount before pressing

ENTER

2. Present customer card

3. Customer selects account and enters pin

Need help?

Do you have a question about the Move5000 and is the answer not in the manual?

Page 1 Move5000 Quick Reference Guide Turning on 1. Sit the terminal on the base and hold down the ENTER key Turning off 1. Remove terminal from the base and hold down the FUNC and CLEAR keys at the same time until the screen shows “SHUT DOWN IN PROGRESS”...
Page 2 Refund 1. Press the F3 and swipe the merchant card you have obtained from Worldline/Paymark 2. Type in the Merchant pin and press ENTER 3. Type in the refund amount and press ENTER 4. Customer swipes/inserts card, enters their account and pin number Log On 1.
Page 3 4. Keep pressing ENTER until you are back at the Paymark screen and reboot Adding a surcharge 1. Press FUNC followed by 8 and then press ENTER 2. Press ENTER to Enable Surcharging 3. Press ENTER if you want to Enable Contactless/PayWave Surcharging or CANCEL if you do not 4.
Page 4 6. This will then take you back to “Multi Merchant Setup”, so then press CANCEL 7. Once you are back to the Paymark screen, perform a REBOOT Replacing Paper...