Lockly VISION ELITE Installation Manual page 18

Step 9
Ensure the TF card that comes with
Vision Connect is properly inserted.
TF card (included, inserted)
Connect power cable and plug
USB power adapter into outlet.
Vision Connect is now ready to connect to your iOS or Android
See troubleshooting on next page if LEDs do not meet the described conditions.
VISION CONNECT HUB SETUP
Connect LAN cable to closest Wi-Fi router
to the Lockly Vision
LAN cable (S) (included)
Wait 2 minutes for hub to self calibrate.
Once LEDs turn RED and blink yellow.
16
Elite lock (<100ft).
™
Always keep the Antenna
on UP position
device.
TM