Table of Contents
Advertisement
Maintaining Your Printer
Updating if your printer is connected to a computer with MAC OS
Monitoring and adjusting printer performance
Checking ink levels
Resetting factory defaults
64
To update the software
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. On the File menu, select
4. If there are software updates, follow the on-screen instructions for updating
your software.
To update the firmware
1. Go to www.kodak.com/go/esp6150downloads.
2. Connect the printer to the computer with a USB cable, Ethernet cable, or
wirelessly (if not currently connected).
3. Select your operating system from the drop-down list.
4. Click
in the Firmware box.
Select
5. Read the instructions, click
Do not turn off or unplug your printer or your computer during the update.
IMPORTANT:
From the control panel, you can perform tasks to help you keep the printer
functioning well.
To check the ink levels:
1. Press
.
Home
2. Press
to select
3. With
Check Ink Levels
The LCD shows approximate levels of ink in the cartridges so you know when it's
time to order replacement cartridges.
To reset all defaults to the factory default settings:
1. Press
.
Home
2. Press
to select
3. Press
to select
4. When you see the message, "This will reset printer settings to factory defaults,"
press
.
OK
NOTE: Resetting factory defaults does not change the date and time, language,
country/region, or network settings.
www.kodak.com/go/aiosupport
:
Check for Updates
:
, then follow the on-screen instructions.
Download
, then press
Maintenance
selected, press
OK
.
Printer Settings
, then press
Reset All Settings
.
.
OK
.
.
OK
Advertisement
Table of Contents
