Scanning From The Control Panel - Kodak ESP6100 - EXTENDED GUIDE User Manual

Scanning from the control panel

To scan a document or a picture from the control panel:
1. Load the original.
2. Press and hold Scan for one second.
The Scan Options menu appears on the LCD.
3. Press to select an option, then press
Scan Option
Scan To
Scan What
Destination
Save as Defaults
4. Press Start Black to make a black-and-white scan, or press Start Color to make a
color scan.
The scanned file appears at the destination you specified.
www.kodak.com/go/aiosupport
KODAK ESP Office 6100 Series All-in-One Printer
Settings
USB-connected
computer
(default)
Name of computer
(only if a computer is
connected by
wireless or Ethernet
network)
Document
(default)
Photo
File
(default)
Application
No / Yes
or to change the setting.
Description
The scanned file is sent to the
USB-connected computer
The scanned file is sent to the
computer on the wireless or Ethernet
network.
Sets the scan settings for scanning a
document (see Changing the scan
settings for scanning from the
control panel, page 36).
Sets the scan settings for scanning a
photograph (see Changing the scan
settings for scanning from the
control panel, page 36).
Sends the scanned file in the format
and to the location on your computer
that you designate (see
scan settings for scanning from the
control panel, page 36).
Sends the scanned file to Home
Center Software.
To save settings as the new default,
press OK , select Yes , then press OK .
Changing the
39