Kodak ESP6100 - EXTENDED GUIDE User Manual page 51

Setting the answer mode (auto answer or manual)
Fax Option
Dialing Mode
Error Correction
The default setting is for Auto Answer to be on. This way the printer picks up all
incoming faxes automatically. The green Auto Answer LED is lit when Auto Answer
is on.
To turn off Auto Answer, press the Auto Answer button so that the green LED is off.
www.kodak.com/go/aiosupport
KODAK ESP Office 6100 Series All-in-One Printer
Settings
Tone (default) / Pulse Determines how a fax number is dialed
On (default) / Off
Description
by the printer.
Tone dialing (the more common
method) uses tones to dial a phone
number. It is faster and more reliable
than pulse dialing, which uses a series of
pulses to dial a phone number.
Traditionally, pulse dialing was used by
rotary phones; tone dialing is used by
touch-tone phones.
Error correction is applied only when
sending black-and-white faxes. It
reduces the loss of data, which can occur
on poor phone lines.
Error correction increases the send time
on poor phone lines, but the
transmission is much more reliable.
(Error correction does not apply to faxes
being received.)
45