Table of Contents
Advertisement
Fax Option
Settings
Rings to Answer
1 to 6 (default is 4)
Redial if No Answer
Yes (default) / No
Busy Redial
0 to 12
Attempts
(default is 5)
Disable Call Waiting No (default) / Yes
Call Waiting Disable
*70 (default)
Code
www.kodak.com/go/aiosupport
KODAK ESP Office 6100 Series All-in-One Printer
Description
The number of times that your phone
will ring before the fax picks up the call.
If you use a dedicated phone line for your
printer, set the Rings to Answer to any
setting. If the printer shares the phone
line with an answering machine, set the
Rings to Answer to a higher number (5
or 6) than the rings to answer for the
answering machine (typically 4 rings).
This allows the answering machine to
pick up phone calls. The printer will
monitor the line after the answering
machine picks up, and, if set to Auto
Answer, will detect an incoming fax and
receive it.
If the number you call is busy, the printer
will redial the number once
automatically.
The number of times that the fax will
attempt to redial a busy number.
If you have call-waiting service on your
phone line, you can disable it so that an
incoming call does not interrupt your fax
transmission.
Select Yes to disable call waiting, then
enter the call waiting disable code
(below).
The printer automatically dials the call
waiting disable code before dialing the
number to which you are sending a fax.
This code disables call waiting for the
duration of the fax, preventing incoming
calls from interrupting your fax
transmission.
The usual code to disable call waiting is
the default *70. If the call waiting disable
code is different in your area, press OK ,
then press
to erase the current code.
Use the keypad to enter the correct
code, then press OK .
NOTE: You have to enable call waiting
manually after your fax
transmission.
43
Advertisement
Table of Contents
