Copying; Loading Originals For Copying; Copying A Document; Using The Default Settings To Copy A Document - Kodak ESP6100 - EXTENDED GUIDE User Manual

5

Copying

Loading originals for copying

Copying a document

Using the default settings to copy a document

Adjusting the settings and copying a document

30
You can copy documents and photographs with your all-in-one printer. The printer
produces high-quality color or black-and-white copies on a variety of paper types
(see Paper types, page
To copy documents (up to 30 pages) on plain paper, load the original(s) in the
automatic document feeder (ADF).
To copy a photograph, documents on thick paper, or a document that is too small or
too large to fit in the ADF, place the original on the scanner glass. (The ADF accepts
originals from 6.9 x 9.8 in. / 175 x 249 mm to 8.5 x 14 in. / 216 x 356 mm.)
For more information on loading originals, see
You can copy a document using the default settings, or you can make adjustments to
the quantity, size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page 64), or defaults that you have set on the printer (see
page 31).
To copy a document using the current default settings:
1. Place the original document in the ADF or on the scanner glass.
2. Press and hold Copy for one second.
3. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
NOTE: If you load the original document in the ADF, the ADF automatically feeds
the document into the printer when you begin copying.
To copy a document using settings other than the default settings:
1. Place the original document in the ADF or on the scanner glass.
2. Press and hold Copy for one second.
The Copy Document Options menu appears on the LCD.
www.kodak.com/go/aiosupport
15).
Loading originals, page
Resetting factory
Save as Defaults,
25.