Table of Contents
Advertisement
Copying
Changing the number of copies of a photograph
34
Plain Paper Quality
Photo Paper Quality
Brightness
Preview
Save as Defaults
5. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
To change the number of copies:
1. Place the original photograph on the scanner glass.
2. Press Home .
3. Press
to select Copy Photo , then press OK .
4. Make sure Quantity is selected.
5. Press
or
to select a number, or use the numeric keypad to enter the
number of copies.
6. Press Start Black to make black-and-white copies, or press Start Color to make
color copies.
www.kodak.com/go/aiosupport
Normal
Good quality output; prints faster than
(default)
Best.
Best
The highest quality, but the slowest
print speed; eliminates the banding
effect that sometimes occurs when
printing Draft or Normal.
Draft
The fastest print speed, but the lowest
quality.
Automatic
The printer detects photo paper in the
(default)
paper tray and sets Best quality
automatically.
Normal, -3 to +3
Lightens or darkens the copy.
(Normal is default)
Normal is no change from the original;
-3 is the darkest; +3 is the lightest.
No (default) / Yes
To see a preview of the photograph on
the LCD, select Yes .
No / Yes
To save settings as the new default,
press OK , select Yes , then press OK .
Advertisement
Table of Contents
