Introduction - Assa Abloy PTI AP1 User Manual

INTRODUCTION

The AP1 (Access Point 1) is a PTI RS485 peripheral used for access control at a gate or
door. This document is intended to provide a high level overview of how to operate the
the unit. For additional information, please contact PTI Support.
It includes:
• OLED graphic display with customization capability
• 12 key tamper resistant touchpad with RGB backlit keys and an optional integrated
heater
• Bluetooth Low Energy integration to the Easy Code Mobile application
• Two supervised inputs for door and gate monitoring or request to exit controls.
• Two relays for door and gate control.
• An RS485 Interface with 2500 Volts of isolation and state of the art surge protection.
• State of the art power input surge protection with isolated power.
• Integrated voltmeter for monitoring input power.
• Wide DC input voltage range that allows for 24V battery backed supplies. This results
in lower IR cable loss resulting in much longer power supply to device cable lengths.
• One piece enclosure with hinge for easy servicing.
• Two screws secure enclosure. Screws are captive and cannot be lost.
• High quality, elevator style terminal blocks ensure reliable connections.
• Dual mode tamper detection for security and reliability.
• Remote firmware update capability (pending system implementation)
• Remote configuration capability (pending system implementation)
• Remote screen customization for company logos and QR codes. (pending system
implementation)
KEYPAD
AP1
User Manual
Sales: +1.800.523.9504
Support: +1.866.240.7602
Web: ptisecurity.com
Rev C – March 2024
Page - 3