Table of Contents
Advertisement
Assembly
Assembly
Assembly Step 4
Step 4:
Fix the front cover using the washers (18) and screws M8x15 (41) to the front of the HomeGym H1.
Assembly Step 5
Step 5:
Hook the 2 handles (29) onto the two brackets on the traction unit using the snap hooks (22).
If you need this to be longer, use the chains included in delivery (53). If necessary, you can also use longer chains. You can
usually obtain suitable chains for this from any DIY or hardware store.
7
6
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartGy H1 and is the answer not in the manual?