High intensity unidirectional elevated light for approach, threshold and runway end and for sequenced flashing lights (sfls), runway threshold identification (rtils) systems (42 pages)
Page 3
Material Handling Precautions and Storage precautions that must be followed. ADB SAFEGATE reserves the right to examine goods upon which a claim is made. Said goods must be presented in the same condition as when the defect therein was discovered. ADB SAFEGATE furthers reserves the right to require the return of such goods to establish any claim.
Page 4
This manual could contain technical inaccuracies or typographical errors. ADB SAFEGATE BV reserves the right to revise this manual from time to time in the contents thereof without obligation of ADB SAFEGATE BV to notify any person of such revision or change. Details and values given in this manual are average values and have been compiled with care. They are not binding, however, and ADB SAFEGATE BV disclaims any liability for damages or detriments suffered as a result of reliance on the information given herein or the use of products, processes or equipment to which this manual refers.
1.0 Safety Introduction to Safety This section contains general safety instructions for installing and using ADB SAFEGATE equipment. Some safety instructions may not apply to the equipment in this manual. Task- and equipment-specific warnings are included in other sections of this manual where appropriate.
Note To minimize the risk of errors, the ADB SAFEGATE Sales Representative will have information on which gasket goes with which base. This information is also provided in the product Data sheets, the User Manuals and the Spare Part Lists.
If the inset light fixture is to be installed on another type of base or adapter ring not provided by ADB SAFEGATE, contact ADB SAFEGATE. The inset light fixture is fixed in the base by six M10 lock nuts or by six M10×25 or M10×22 bolts dependent on base installation.
Spare parts are available, if required. For more information, see www.adbsafegate.com and the Spare Parts List document, or contact ADB SAFEGATE for assistance. CAUTION Use of incorrect combination of gaskets, bolts and nuts can create severe damages to the product installation and create multiple safety risks.
7.0 Ordering Codes and Spare Parts Spare parts are available for RELIANCE and RELIANCE IQ inset light fixtures. For more information, see www.adbsafegate.com and the spare part lists, or contact ADB SAFEGATE for assistance. UM-0210, Rev. 4.1, 2022/11/28 Copyright ADB Safegate, All Rights Reserved...
This function is disabled in IQ0 fixtures but could be enabled later. IQ light fixtures are only available as a one connector option. 7.2 Spare Parts (RC-RZ-RX) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code...
Page 42
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
• A 3-pin cable and connector are only available for the ICAO standard regardless of the color combination. 7.4 Spare Parts (RE) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting...
Page 45
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.6 Spare Parts (RT) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, unidirectional 1 prism SGE.SP18494 (L-850D) Top plate, unidirectional 2 prisms (F- SGE.SP18539 green) Top plate, unidirectional 3 prisms (G- SGE.SP18551...
Page 48
Note Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.7 Spare Parts (RW) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate unidirectional 3 Prism, SGE.SP18551 Straight Top plate unidirectional 3 Prism, SGE.SP18552 Left Top plate unidirectional 3 Prism, SGE.SP18553...
Page 50
Note Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.9 Spare Parts (RT-RN) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, bidirectional straight SP.012973 Top plate, unidirectional straight SP.012974 Top plate, bidirectional straight (2+1 SGE.SP18550 window) Prism incl. prism gasket, protection plate SGE.SP18497...
Page 54
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.11 Spare Parts (AC) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate unidirectional 3- SGE.SP18551 Prism, Straight Top plate unidirectional SGE.SP18552 3 Prism, Left Top plate unidirectional SGE.SP18553 3 Prism, Right Prism incl.
Page 58
Note Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.12 Spare Parts (AS) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate unidirectional SGE.SP18570 2-prism, Left Top plate unidirectional 2- SGE.SP18569 prism, Right Top plate unidirectional 2- SGE.SP18539 prism, Straight Prism incl.
Page 60
Note Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.14 Spare Parts (SW) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, unidirectional straight SP.012974 Prism incl. prism gasket, protection plate and prism SGE.SP18497 holder Reinforced prism incl. prism gasket, protection plate and SGE.SP18498...
Page 64
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.16 Spare Parts (RS) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting code Top plate, unidirectional straight SP.012974 Prism incl. prism gasket, protection plate and prism SGE.SP18497 holder Reinforced prism incl. prism gasket, protection plate and SGE.SP18498...
Page 68
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
7.18 Spare Parts (TC) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, bidirectional straight SP.012973 Top plate, unidirectional straight SP.012974 Prism incl. prism gasket, protection plate SGE.SP18497 and prism holder Reinforced prism incl.
Page 72
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
RELIANCE Inset Lights Ordering Codes and Spare Parts 7.20 Spare Parts (ICAO SB) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, bidirectional straight SP.012973 Top plate, unidirectional straight SP.012974...
Page 77
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
RELIANCE Inset Lights Ordering Codes and Spare Parts 7.21 Spare Parts (FAA SB) Note Contact ADB SAFEGATE for assistance with ordering spare parts, www.adbsafegate.com. Quantity per Description Order code fitting order Top plate, unidirectional straight SP.012974 Prism incl. prism gasket, protection plate SGE.SP18497...
Page 79
All screws for fastening are included. Component availability or design may be subject to change due to unforeseen circumstances. This document is subject to change or new information from ADB SAFEGATE, as and when available or if required, with reservation for error or price changes.
D.2.1 Local Authority Recycling The disposal of ADB SAFEGATE products is to be made at an applicable collection point for the recycling of electrical and electronic equipment. The correct disposal of equipment prevents any potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling.
Main Unit Serial Number. ADB SAFEGATE will continue to monitor and update according for any future requirements for EU directives as and when EU member states implement new regulations and or amendments. It is our aim to maintain our compliance plan and assist our customers.
Page 95
Tel.: +46 (0)40 699 17 00 Internet: www.adbsafegate.com Fax: +46 (0)40 699 17 30 ADB SAFEGATE, China ADB SAFEGATE Airfield Technologies Ltd. China Unit 603, D Block, CAMIC International Convention Center, No 3, Hua Jia Di East road, ChaoYang district, Beijing 100102 P.R.
Need help?
Do you have a question about the RELIANCE RC and is the answer not in the manual?
Questions and answers