Dexcom G7 User Manual page 111

Remove while using sensor
To remove old sensors from the Bluetooth connections list while you are wearing one,
follow the above steps and keep these tips in mind:
All Dexcom sensors are listed as not connected, even the current one. The current
l
sensor's status changes to connected during the few seconds every 5 minutes
when it's sending your sensor reading to your phone. If you watch the list for up to
5 minutes, you'll see which sensor is the current one.
Don't worry if you remove the current sensor. Within 5 minutes, the sensor will
l
send your next sensor reading to your phone and the sensor will reappear in the
Bluetooth connections list. (Your phone will prompt you to re-pair the sensor —
no pairing code needed.)
10 • Next Sensor Session | Dexcom G7 User Guide 103