System Configuration - Omron V680 RFID Datasheet

Table of Contents

Advertisement

V680 DeviceNet ID Slave
V680-HAM42-DRT
V680-series DeviceNet-compatible Slaves
for RFID Systems.
Read and Write Up To 58 Bytes.
• V680-series DeviceNet-compatible Slaves for RFID systems.
• Includes a built-in Amplifier, yet has a compact size of 65 × 65 ×
65 mm. Compatible with V680-series ID Tags and Antennas.
• Read and write 4, 26, or 58 bytes of data.
• Includes an Access Mode compatible with the V600-HAM42-DRT
to enable the use of existing programs.
• Complies with international standards, including CE, UL/CSA,
and radio wave regulations.
Radio wave regulation compliance is applicable to Japan, Europe,
the U.S.A., and Canada. Radio wave regulation compliance for
China and South Korea is pending. Approval for UL/CSA is
pending.

System Configuration

ID Tag
1-Kbyte memory
V680-D1KP52MT (8 dia. × 5 mm)
For embedding in metallic or
non-metallic surface
1-Kbyte memory
V680-D1KP66MT/V680-D1KP66T
(34 × 34 × 3.5 mm)
For flush mounting on metallic
surface
1-Kbyte memory
V680-D1KP66T-SP (96 × 36.5 ×
6.5 mm)
For flush mounting on
non-metallic surface
2-Kbyte memory
V680-D2KF52M (8 dia. × 5 mm)
For embedding in metallic or
non-metallic surface
2-Kbyte memory
V680-D2KF67M/V680-D2KF67
(40 × 40 × 4.5 mm)
For flush mounting on non-metallic
surface
8-Kbyte/32-Kbyte memory
V680-D8KF68/-D32KF68
(86 × 54 × 10 mm)
For flush mounting on
non-metallic surface
Note 1. Attach an Antenna to the V680-HAM42-DRT DeviceNet ID Slave to read and write V680 ID Tag data.
2. The DeviceNet ID Slave can communicate with ID Tags that comply with ISO/IEC 18000-3 (ISO/IEC 15693) in addition to V680-series ID
Tags. Communications with ID Tags other than V680-series ID Tags, however, may not be stable. Always check compatibility completely
before using other ID Tags.
3. Use a V680-HS51/-HS52 Antenna if the V680-D1KP52MT or V680-D2KF52M is to be embedded in metal. Communications cannot be
performed if a V680-HS63 Antenna is used in combination with the V680-D1KP52MT or V680-D2KF52M.
The V680-HS65 Antenna cannot communicate with V680-D1KP52MT or V680-D2KF52M ID Tags if they are embedded in metal.
V680-HAM42-DRT, V680-HAM91/-HAM81
2
Wireless
Read/Write Antenna
communi-
Cylinder type
cations
V680-HS52
-W:
Standard cable,
waterproof connector
-R:
Flexible cable,
non-waterproof
connector
Cable length: 2 m or 12.5 m
Cylinder type
V680-HS51
Cable length: 2 m
Square type
V680-HS63
V680-HS65
-W:
Standard cable,
waterproof connector
Flexible cable,
-R:
non-waterproof
connector
Cable length: 2 m or 12.5 m
Amplifier
I/O
V680-HAM42-DRT
DeviceNet ID Slave
I/O
Host
Programmable
Controller
Programmable
Controller
Programmable
Controller

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

V680-ham42-drtV680-ham91V680-ham81

Table of Contents