Unit Functions
2-3-7
Unit Conduction Time Monitor
Function Overview
30
3. Select the General Tab.
4. Enter the desired value in the Network Power Voltage field. (The default
value is 11 V.)
5. Click the Download Button, and then click the Reset Button to reset the
Unit.
6. Click the OK Button.
The total ON time (unit: 0.1 h) of the DeviceNet Communications Unit's inter-
nal circuit power can be calculated and recorded.
The monitor value can be maintained in the DeviceNet Communications Unit
and the Unit Maintenance Flag in the Status Area will be turned ON when the
total time reaches the set monitor value. The total ON time can be read using
the Configurator or explicit messages.)
• Measured time: 0 to 429496729 hours (stored data: 00000000 to
FFFFFFFF Hex)
• Measuring unit: 0.1 hr
DeviceNet
Communications Unit
Total ON time
DeviceNet
Recorded in Unit
Total ON time
Internal circuit
power
Section 2-3
ON
OFF