2-3-11 Last Maintenance Date - Omron SMARTSLICE - 04-2008 Operation Manual

Devicenet communications unit

Table of Contents

Unit Functions

2-3-11 Last Maintenance Date

Function Overview

Setting Using the DeviceNet Configurator

1,2,3...

This function enables the date on which maintenance was last performed to

be written to the Unit. This means that the timing for future maintenance can

be judged more easily. The date can be written using the Configurator.

1. From the Main Window, double-click the icon of the DeviceNet Communi-

cations Unit to be set to display the Edit Device Parameters Window. (From

the Maintenance Mode Window, click the right mouse button over the icon

of the DeviceNet Communications Unit to be set and select Parameter and

Edit to display the Edit Device Parameters Window.)

2. Click the General Tab, and select the desired date from the pull-down

menu for the Last Maintenance Date field. (Click the Today Button to enter

the current date.)

3. Click the Download Button, and then click the Reset Button to reset the

Unit.

4. Click the OK Button.

Section 2-3

Table of Contents

Table of Contents

Smartslice grt1-drt