Changing The Display Color - Omron K3GN - V1.04 User Manual

5.23 Changing the Display Color

color
This parameter allows you to change the display color of the main indicator.
Parameter Set value
grn-r
grn
color
red-g
red
For details, refer to Section 6.10 Display Color Change.
Procedure
A.
When the product is at the operation level,
press the L key and hold it down for at least
three seconds to enter the initial setting elvel.
"s" will appear on the level indicator, indicating
the product has entered the initial setting level.
B.
Press the M key several times until parameter
"amov" is displayed, and then enter password
"–0169".
"f" will appear on the level indicator, indicating
the product has entered the advanced-function
setting level.
For details on how to move to the
advanced-function setting level, refer to Section
5.2 Moving among Levels.
C.
Press the M key several times until parameter
"color" appears on the main indicator.
D.
Press the S key to display the set value of
parameter "color" on the main indicator.
The current set value of the display color will
appear on the main indicator.
E.
Press the S key again.
The set value will start blinking, indicating the
product is in the change state.
F.
Use the key to change the set value.
/
ZERO
G.
Press the M key to go to the next parameter.
The change is saved.
H.
Press the L key and hold it down for at least
one second to return to the initial setting level.
5.23 Changing the Display Color
Advanced-function setting level
Description
Green – red: The display color is normally green, and
changes to red at comparative output
ON.
Green: The display color is always green.
Red – green: The display color is normally red, and
changes to green at comparative output
ON.
Red: The display color is always red.
L
0in-t
T
s
3 sec.
" s " appears.
0init
T
f
" f " appears.
M ...
color
T
f
S
g r n - r
T
f
"SV" is illuminated.
S
grn-r
T
f
/ grn
T
ZERO
pz
f
M
coret
T
f
L
0in-t
T
s
1 sec.
75