Selecting An Input-Pulse Frequency Range; Selecting An Input-Pulse Frequency Range (P-Fre) - Omron K3GN - V1.04 User Manual

CHAPTER 5 OPERATION

5.10 Selecting an Input-pulse Frequency Range

p-fre
TIPS
A change in input-pulse
frequency range initializes
some parameters.
Parameters " inp ", " dsp "
and " dp " are initialized
according to the current
input-pulse frequency
range.
52
This parameter allows you to select an input-pulse frequency range. The value of
the parameter represents the upper limit of available ranges.
Before selecting an input-pulse frequency range, you must set the input type
parameter to "pulse".
Parameter Set value
30
p-fre
5k
If input signals come from relay contacts, set the range to "30 Hz". Doing so
eliminates chattering noise from input signals.
Procedure
A.
When the product is at the operation level,
press the L key and hold it down for at least
three seconds.
"5" will appear on the level indicator, indicating
the product has entered the initial setting level.
B.
Press the M key several times until parameter
"p-fre" appears on the main indictor.
C.
Press the S key to display the set value of the
parameter on the main indicator.
The current set value of the input-pulse
frequency range will appear on the main
indicator.
D.
Press the S key again.
The set value will start blinking, indicating the
product is in the change state.
E.
Use the key to change the set value.
/
ZERO
F.
Press the M key to go to the next parameter.
The change is saved.
G.
Specify the values of other parameters related
to the input-pulse frequency range. (Refer to
the Appendix).
H.
Press the L key and hold it down for at least
one second to return to the operation level.
Description
Measuring range: 0.05 to 30.00 Hz
Measuring range: 0.1 to 5000.0 Hz
Initial setting level
L
0in-t
T
s
3 sec.
"s" appears.
M ...
p-fre
T
s
S
5 k
T
a
s
"SV" is illuminated.
S
a4-5k
T
s
/ 30
T
ZERO
pu1
s
M
piinp
T
s
L
123$5
T
a
1 sec.