Table of Contents
Advertisement
Specifications
■ Ratings (at an Ambient Temperature of 25 C)
Detection Power Supply
Rated power supply voltage
Operating voltage range
Current consumption
Operating Circuit
Input method
Voltage input
Rated input voltage
12 to 24 VDC
Operating input voltage
9.6 to 30 VDC
range
Must operate voltage
9.6 VDC max.
Must release voltage
1 VDC min.
Input current
7 mA DC max. (at rated input voltage)
■ Characteristics
Operate time
Release time
Main circuit
Output ON voltage drop
OFF leakage current
Alarm output
Output ON voltage drop
OFF leakage current
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Ambient temperature
Ambient humidity
Weight
Certified standards
EMC
J-60
Solid State Relays with Failure Detection Function
100 to 240 VAC (50/60 Hz)
75 to 264 VAC (50/60 Hz)
15 mA AC max. (at 200 VAC)
1/2 of load power source cycle + 1 ms max.
1/2 of load power source cycle + 1 ms max.
1.6 V rms max.
10 mA max. (at 200 VAC)
1.5 V max.
0.1 mA max.
100 M min. (at 500 VDC)
2,500 VAC, 50/60 Hz for 1 min
Destruction: 10 to 55 to10 Hz, 0.35-mm single amplitude
Destruction: 294 m/s
Operating: -20 to 60 C (with no icing or condensation)
Storage: -30 to 70 C (with no icing or condensation)
45% to 85%
Approx. 300 g
UL508, CSA22.2 No. 14, EN60947-4-3 (IEC947-4-3); Certified by VDE
Emission
Immunity
Immunity
Immunity
Immunity
Immunity
Immunity
Main Circuit
Rated load voltage
Operating voltage range
Rated carry current
Minimum load current
Inrush current resistance (peak value)
2
Permissible (I
t)
Applicable load
(with Class-1 AC resistive load)
Alarm Output
Output OFF collector voltage
Maximum carry current
Output form
2
EN55011 Group 1 Class B
ESD
IEC947-4-3, EN61000-4-2
4 kV contact discharge
8 kV air discharge
Electromagnetic
IEC947-4-3, EN61000-4-3
10 V/m (80 MHz to 1 GHz)
EFT
IEC947-4-3, EN61000-4-4
2 kV AC power-signal line
Surge transient
IEC947-4-3, EN61000-4-5
2 kV
RF disturbance
IEC947-4-3, EN61000-4-6
10 V (0.15 to 80 MHz)
Dips
IEC947-4-3, EN61000-4-11
G3PC
100 to 240 VAC (50/60 Hz)
75 to 264 VDC (50/60 Hz)
20 A (Ta = 40)
0.1 A
220 A (60 Hz, 1 cycle)
2
260 A
s
4 kW (at 200 VAC)
30 VDC max.
0.1 A
Independent NPN open collector
Advertisement
Table of Contents
