Page 1
24 VDC G3DZ-F4B G3DZ-2R6PL 12 VDC 24 VDC Note: Error rate (P level) for the G6D-1A is 5 V at 10 mA and that for the G6D-1A-AP is 5 V at 1 mA. Short Bar Applicable Terminal Relay Model G6D-F4B...
2. Rated current and coil resistance were measured at a coil temperature of 23 C with a tolerance of 10%. 3. Operating characteristics were measured at a coil temperature of 23 C. 4. The maximum allowable voltage is the maximum value of the allowable voltage range for the relay coil operating power supply . There is no continuous allowance.
Page 3
Mechanical:20,000,000 operations min. (at 18,000 operations/hr) Electrical: 100,000 operations min. (3 A at 250 VAC, resistive load) 100,000 operations min. (3 A at 30 VDC, resistive load) (at 1,800 operations /hr) Ambient temperature Operating: –25 C to 55 C (with no icing) Storage: –25 C to 55 C (with no icing)
DC resistive load Switching current (A) Switching voltage (V) G3DZ-F4B Load Current vs. Ambient Temperature Inrush Current Resistivity Characteristics Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) Energizing time (ms) Ambient temperature ( C)
Page 5
G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B Dimensions Note: All units are in millimeters unless otherwise indicated. G6D-F4B G3DZ-F4B Mounting Dimensions 16, M3 Phillips Two, 4 dia. or M3.5 holes head screws Terminal Arrangement/ Internal Connections (Top View) Input side 68 max. Output side Note: Make sure that the polarity 31 max.
Precautions Wiring Coil Voltage Be sure to turn OFF the power when wiring the Unit and do not touch Make sure not to impose voltage exceeding the permissible voltage the charged terminals of the Unit. Otherwise, an electric shock may on the coil continuously.
Page 8
G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. J115-E1-1 In the interest of product improvement, specifications are subject to change without notice.