Table of Contents
Advertisement
Quick Links
Solid State Relays
G3PA
Extremely Thin Relays Integrated with Heat
Sinks
• Downsizing achieved through optimum design of heat sink.
• Mounting possible via screws or via DIN track.
• Close mounting possible for linking terminals. (Except for G3PA-
260B-VD and G3PA-450B-VD-2.)
• Applicable with 3-phase loads.
• Replaceable power element cartridges.
• Comply with VDE 0160 (finger protection), with a dielectric
strength of 4,000 V between input and load.
• Certified by UL, CSA, and VDE (reinforced insulation).
Refer to Safety Precautions for All Solid State
Relays.
Model Number Structure
■ Model Number Legend
G3PA-@@@@-@-@
1
2 3 4 5
6
7
1. Basic Model Name
G3PA: Solid State Relay
2. Rated Load Power Supply Voltage
2:
200 VAC
4:
400 VAC
3. Rated Load Current
10:
10 A
20:
20 A
30:
30 A
40:
40 A
50:
50 A
60:
60 A
4. Terminal Type
B:
Screw terminals
5. Zero Cross Function
Blank: Equipped with zero cross function
L:
Not equipped with zero cross function
6. Certification
VD:
Certified by UL, CSA, and VDE
7. Special Specifications
Blank: Standard models
2:
480-V models
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
CSM_G3PA_DS_E_3_2
1
Advertisement
Table of Contents
Related Manuals for Omron G3PA-450B-VD-2
Summary of Contents for Omron G3PA-450B-VD-2
- Page 1 • Certified by UL, CSA, and VDE (reinforced insulation). For the most recent information on models that have been certified for Refer to Safety Precautions for All Solid State safety standards, refer to your OMRON website. Relays. Model Number Structure ■...
-
Page 2: Ordering Information
180 to 528 VAC G32A-A420-VD-2 DC12-24 G3PA-420B-VD-2 DC12-24 30 A G32A-A430-VD-2 DC12-24 G3PA-430B-VD-2 DC12-24 50 A G32A-A450-VD-2 DC12-24 G3PA-450B-VD-2 DC12-24 ■ Other Units (Order Separately) Units that Enable 2-line Switching of 3-phase Power Name Current flow Model Applicable SSR Short-circuit Unit... -
Page 3: Specifications
G3PA-420B-VD 12 to 24 VDC 9.6 to 30 VDC 7 mA max. 9.2 VDC max. 1 VDC min. G3PA-430B-VD G3PA-420B-VD-2 G3PA-430B-VD-2 G3PA-450B-VD-2 Output Model Rated load voltage Load voltage range Load current Inrush current (reference value) G3PA-210B(L)-VD 24 to 240 VAC (50/60 Hz) 19 to 264 VAC (50/60 Hz) 0.1 to 10 A at 40°C... - Page 4 G3PA ■ Characteristics Item G3PA- G3PA- G3PA- G3PA- G3PA- G3PA- G3PA- G3PA- G3PA- 210B(L)-VD 220B(L)-VD 240B(L)-VD 260B(L)-VD 420B-VD 420B-VD-2 430B-VD 430B-VD-2 450B-VD-2 Operate time 1/2 of load power source cycle + 1 ms max. (DC Input, -B models) 1 1/2 of load power source cycle + 1 ms max. (AC Input) 1 ms max.
-
Page 5: Operation
G3PA Operation ■ Replacement Parts G32A-A Power Device Cartridge The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned possibly by an excessive flow of current, in which case, dismount the damaged cartridge for replacement. The damaged cartridge can be replaced with a new one without disconnecting the wires from the G3PA. - Page 6 G3PA ■ Replacement Procedure G32A-A10(L)-VD/G32A-A20(L)-VD/G32-A420-VD(-2) To remove or replace the Power Device Cartridge, use the special tool provided with it for extraction. (Do not switch on the power without the Power Device Cartridge. For details, see the attached the instruction sheet with the product.) Extraction Follow the procedures below to dismount the Power Device Cartridge from the G3PA.
- Page 7 G3PA 3. Insert the cartridge into the opening of the G3PA so that side A 4. Tighten the screws on both the corners with a tightening torque of and side B are even. 0.59 to 0.78 N·m. 5. Tighten the screws on both the sides with a tightening torque of 0.59 to 0.78 N·m.
-
Page 8: Engineering Data
Ambient temperature (°C) For close mounting of two or three SSRs, limit the load current to 90% or less. G3PA-420B-VD, G3PA-420B-VD-2 G3PA-430B-VD, G3PA-430B-VD-2 G3PA-450B-VD-2 Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) For close mounting of two or three SSRs, limit the load current to 80% or less. -
Page 9: Horizontal Mounting
Input voltage (V) Input voltage (V) Horizontal Mounting Panel Ground G3PA-210B(L)-VD, G3PA-220B(L)-VD G3PA-240B(L)-VD G3PA-260B(L)-VD G3PA-220B(L)-VD G3PA-210B(L)-VD −30 −20 Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) G3PA-450B-VD-2 G3PA-420B-VD, G3PA-430B-VD G3PA-420B -VD-2, G3PA-430B-VD-2 G3PA-430B-VD G3PA-420B-VD Ambient temperature (°C) Ambient temperature (°C) - Page 10 Close Mounting (Up to Three) Panel Ground DIN track G3PA-210B(L)-VD, G3PA-220B(L)-VD G3PA-240B(L)-VD G3PA-260B(L)-VD G3PA-220B-VD G3PA-210B-VD Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) G3PA-420B-VD, G3PA-420B-VD-2 G3PA-430B-VD, G3PA-430B-VD-2 −30 −30 Ambient temperature (°C) Ambient temperature (°C) G3PA-450B-VD-2 Ambient temperature (°C)
- Page 11 G3PA One Cycle Surge Current: Non-repetitive Note: Keep the inrush current to half the rated value if it occurs repetitively. G3PA-210B(L)-VD G3PA-220B(L)-VD, G3PA-420B-VD, G3PA-240B(L)-VD/260B(L)-VD, G3PA-420B-VD-2 G3PA-430B-VD, G3PA-430B-VD-2, G3PA-450B-VD-2 Energized time (ms) Energized time (ms) Energized time (ms)
- Page 12 G3PA Dimensions Note: All units are in millimeters unless otherwise indicated. G3PA-210B(L)-VD With Terminal Without Terminal Mounting Terminal Cover Cover Holes Arrangement/ 4.6 dia. Two, M4 Internal Connections Linking terminal B1 Two, 4.5 dia. or M4 holes Two, M3.5 Linking terminal B2 4.6 x 5.6 elliptical hole...
- Page 13 G3PA G3PA-260B(L)-VD With Terminal Without Terminal G3PA-450B-VD-2 Cover Terminal Arrangement/ Cover Mounting Holes Internal Connections 4.6 dia. Two, M5 Two, M3.5 Two, 4.5 dia. or M4 holes G3PA-260B G3PA-450B -VD-2 − − 4.6 x 5.6 elliptical hole 110 max. 100 max.
-
Page 14: Safety Precautions
G3PA Safety Precautions ■ Precautions for Correct Use Load Please observe the following precautions to prevent failure to Load power Input operate, malfunction, or undesirable effect on product performance. supply Load Connection When attaching a heat sink to the G3PA-(VD), in order to facilitate heat dissipation, apply silicone grease or equivalent heat-conductive For an AC load, use a power supply rated at 50 or 60 Hz. -
Page 15: Close Mounting
G3PA Close Mounting A heat exchanger, if used, should be located in front of the SSR Units to ensure the efficiency of the heat exchanger. SSR Mounting Pitch Please reduce the ambient temperature of SSRs. The rated load current of an SSR is measured at an ambient Panel Mounting (At a rated ambient temperature of 40°C). - Page 16 Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS.