Omron E5EK DEVICENET User Manual page 99

SP tracking enable
• Specifies the operation when the remote SP mode is switched to the local SP
mode.
• When this parameter is set to "ON", the local SP is changed to the remote SP
Function
value.
• When this parameter is set to "OFF", the local SP is not influenced by the remote
SP .
[
Comment
F Related article
4.3 How to Use the Remote SP (page 4-7)
F Related parameters
See
"Set point during SP ramp" (level 0 mode)
"SP mode" (level 2 mode)
Setting Range
]: Enabled/[ ]: Disabled
Conditions of Use
The remote SP function must be enabled.
Default
[ ]
Option Mode
5--41