Lcd Display - MPP Solar 8048MAX 2 Series User Manual

Step 3: Please select setting program by following each procedure.
Program#
Press "
starting time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press "
select starting time. Press "
" " to confirm. Press "
button to adjust values, press "
from 00 to 23, with 1-hour increment.
Press "
starting time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press " " button to exit the Setup Mode.

LCD Display

The LCD display information will be switched in turn by pressing the "UP" or "DOWN" button. The selectable
information is switched as the following table in order.
Selectable information
Input voltage/Output voltage
(Default Display Screen)
Input frequency
PV voltage
Operation Procedure
" button to set up Solar First Timer. Press "
" or " " button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button to set up Solar & Utility Timer. Press "
" or "
" button to select end time. Press "
" button to confirm. The setting values are
" button to set up Solar Only Timer. Press "
" or " " button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button to select
" or "
" button to adjust values and press
" button to select
" or "
LCD display
Input Voltage=230V, output voltage=230V
Input frequency=50Hz
PV1 voltage=260V
28
LCD Screen
" to
" button to
" button to
" or " "
" to
" button to