MPP Solar 8048MAX 2 Series User Manual page 29

Error message for USB On-the-Go functions:
Error Code Messages
No USB disk is detected.
USB disk is protected from copy.
Document inside the USB disk with wrong format.
If any error occurs, error code will only show 3 seconds. After three seconds, it will automatically return
to display screen.
2. Timer Setting for Output Source Priority
This timer setting is to set up the output source priority per day.
Procedure
Step 1: Press and hold "
source priority.
Step 2: Press " ", "
descriptions in Step 3).
Step 3: Please select setting program by following each procedure.
Program#
Press "
starting time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press "
starting time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press "
starting time. Press "
confirm. Press "
adjust values, press "
23, with 1-hour increment.
Press " " button to exit the Setup Mode.
3. Timer Setting for the Charger Source Priority
This timer setting is to set up the charger source priority per day.
Procedure
Step 1: Press and hold "
source priority.
Step 2: Press " ", "
descriptions in Step 3).
" button for 3 seconds to enter Timer Setup Mode for output
" or " " button to enter the selectable programs (detail
Operation Procedure
" button to set up Utility First Timer. Press "
" or " " button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button to set up Solar First Timer. Press "
" or " " button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button to set up SBU Priority Timer. Press "
" or " " button to adjust values and press "
" button to select end time. Press "
" button to confirm. The setting values are from 00 to
" button for 3 seconds to enter Timer Setup Mode for charging
" or " " button to enter the selectable programs (detail
" button to select
" or "
" button to select
" or "
" or "
27
LCD Screen
LCD Screen
" to
" button to
" to
" button to
" button to select
" to
" button to
LCD Screen