Error Log - Omron CJ1W-ETN21 - 04-2009 Operation Manual

Error Log

Bit Error
5 DNS server error
6 Routing table error
7 to 10 (Not used.)
11 SNTP server error
12 SMTP server error
13 POP server error
14 Address disagreement
15 EEPROM error
8-3

Error Log

Logged Errors
206
Status Manipulated by
ON Unit
OFF Unit
ON Unit
OFF Unit
--- ---
ON Unit
OFF Unit
ON Unit
OFF Unit
ON Unit
OFF Unit
ON Unit
OFF Unit
ON Unit
OFF Unit
The Ethernet Unit provides an error log that records errors that have occurred
during Ethernet Unit operation. The contents of the error log can be read or
cleared from a Programming Device, such as the CX-Programmer, or it can
be read or cleared using FINS commands from a workstation or computer.
(See 7-3-7 ERROR LOG READ and 7-3-8 ERROR LOG CLEAR).
The following errors are recorded in the error log.
• Errors in network operation
• Errors in data transfers
• Error in the CPU Unit
Unit operation
ON when the following errors occur during DNS server
operation:
• An illegal server IP address is set.
• A timeout occurs during communications with the
server.
OFF when DNS server operation is normal.
ON if the routing table information is incorrect.
OFF when the routing table is normal.
---
ON when the following errors occur during SNTP server
operation:
• An illegal server IP address or host name is set.
• A timeout occurs during communications with the
server.
OFF when SNTP server operation is normal.
ON when the following errors occur during SMTP server
operation:
• An illegal server IP address or host name is set.
• A timeout occurs during communications with the
server.
• The verification time from the server has expired (when
POP before SMTP is set).
OFF when SMTP server operation is normal.
ON when the following errors occur during POP server
operation:
• An illegal server IP address or host name is set.
• A server verification error (user name or password)
occurs.
• A timeout occurs during communications with the
server.
OFF when use of the POP server is normal.
ON if the remote IP address is set to automatic genera-
tion but the local IP address host number and FINS
node address do not agree.
OFF under all other circumstances.
ON if an error has occurred in the EEPROM memory.
OFF when the EEPROM memory is normal.
Section 8-3