Smtp - Omron CJ1W-ETN21 - 04-2009 Operation Manual

SMTP

3-4 SMTP
SMTP Server Setup
Item
Designation Select whether the SMTP server used for send-
Method ing mail is to be specified by IP address or the
host's domain name (i.e., host name).
IP Address Set the IP address for the SMTP server used for
sending mail.
This setting is enabled only when "IP address" is
selected as the method for specifying the server.
Host Name Set the host domain name (i.e., the host name)
for the SMTP server that is to be used for send-
ing mail.
This setting is enabled only when "host name" is
selected as the method for specifying the server.
Port No. Set the port to be used for connecting to the
SMTP server that is to be used for sending mail.
This setting does not normally need to be
changed.
Local Mail Set the mail address for the Ethernet Unit.
Address
Use POP before Select whether or not to use the mail receiving
SMTP method (POP before SMTP) in which the POP
server must be accessed (to receive mail) before
the SMTP server is accessed (to send mail).
For details, refer to SECTION 2 Mail Send Function in the Operation Manual
Construction of Applications.
Contents
Section 3-4
Default
IP Address
0.0.0.0
None
0
(No. 25 is used.)
None
Not checked
67