Table of Contents
Advertisement
4.
Troubleshooting
4.1 Enabling/Disabling of Response Signals
-OK, CONNECT, DISCONNECT & ERROR
Promi-SD™ will respond to users on the current status, success & failure of
connections, and error mode. Both PromiWIN™ and Terminal Programs will receive
related response signals from Promi-SD™.
In some cases, various equipment may regard these four response signals incorrectly
and react inappropriately.
response signals via PromiWIN™ or AT commands at Terminal.
1) By Promi-WIN™, check OFF at Signal pane at Device Setting panel to disable 4
response signals from Promi-SD™.
2) By AT commands at your Terminal program.
Promi-SD™ User Manual ver 1.0
www.initium.co.kr
To avoid these possible errors, users may disable the
Model: Promi-SD202-OA
28
Advertisement
Table of Contents
