Pop - Omron CJ1W-ETN21 - 04-2009 Operation Manual

POP

3-5 POP
POP Server Setup
68
Item
Designation Select whether the POP3 server used for receiving
Method mail is to be specified by IP address or the host's
domain name (i.e., host name).
IP Address Set the IP address for the POP3 server used for
receiving mail.
This setting is enabled only when "IP address" is
selected as the method for specifying the server.
Host Name Set the host domain name (i.e., the host name) for
the POP3 server that is to be used for receiving
mail.
This setting is enabled only when "host name" is
selected as the method for specifying the server.
Port No. Set the port to be used for connecting to the POP3
server that is to be used for receiving mail.
This setting does not normally need to be changed.
Account Name Set the account name to be used for sending and
receiving mail.
Only alphanumeric characters can be used.
If no account name is set, the portion of the local e-
mail address to the left of the @ will be used.
Mail Password Set a password for the account that is to be used
for sending and receiving mail.
Server Access Set the interval for sending and receiving mail. Mail
Interval will be automatically sent and received at the inter-
val set here.
For details, refer to SECTION 3 Mail Receive Function in the Operation Man-
ual Construction of Applications.
Contents
Section 3-5
Default
IP Address
0.0.0.0
None
0
(Number 110
is used.)
None
None
0
(5 minutes)