Omron CJ1W-ETN21 - 04-2009 Operation Manual page 222

Command/Response Reference
Command Block
Response Block
Parameters
Memory Status
(Response)
1,2,3...
27 63
Command
code
27 63
92 bytes
Command Response Memory status
code code
A total of 23 data items in six areas are returned in the following order. Each
item consists of 4 bytes.
1. Short Buffer Application: Two items are returned (8 bytes).
a. The number of short buffers currently being used.
b. The number of short buffers in the system (fixed at 1,472 decimal).
2. Short Buffer Application by Type: Thirteen items are returned (52 bytes).
a. The number of short buffers used for storing communications data
b. The number of short buffers used for protocol headers (TCP, UDP, IP,
ICMP, ARP)
c. The number of short buffers used in socket structures
d. The number of short buffers used as protocol control blocks
e. The number of short buffers used for routing tables
f. Not used (always 0)
g. Not used (always 0)
h. The number of short buffers used for IP fragment re-assembly queue
headers
i. The number of short buffers used for storing socket addresses
j. Not used (always 0)
k. The number of short buffers used for storing socket options
l. The number of short buffers used for storing access rights
m. The number of short buffers used for storing interface addresses
3. Long Buffer Application: Two items are returned (8 bytes).
a. The number of long buffers currently being used.
b. The number of long buffers in the system (fixed at 64 decimal).
4. Not Used: Always 0. (4 bytes)
5. Network Memory Application: Two items are returned.
a. The number of bytes used (in K bytes)
b. The percentage used
6. Memory Exhaustion Log (12 bytes)
Counts for the following values indicate a high load on the Ethernet Unit.
These high loads may be caused by problems in communications, partic-
ularly FINS communications and UDP sockets. If these values are consis-
tently high, check your applications.
Section 7-3
197