Omron 3G3MV-P10CDT-E User Manual page 37

Unit Components and Specifications
Transistor Outputs (Sinking)
Item
Maximum switching capacity
Minimum switching capacity
Maximum inrush current
Leakage current
Residual voltage
ON response time
OFF response time
Fuse
Circuit configuration
Note 1.
Caution
24
4.5 to 30VDC, 0.2 A/output
0.5 mA
0.9 A for 10 ms
0.1 mA
1.5 V max.
20 µs max.
40 µs max. for 4.5 to 26.4 VDC, 10 to 100 mA
0.1 ms max for 4.5 to 30 VDC, 10 to 200 mA
One fuse per output (cannot be replaced by user)
When using OUT01000 or OUT01001 as a pulse output, connect a dummy
resistor as required to bring the load current between 0.01 and 0.1 A. If the
load current is below 0.1 A, the ON-to-OFF response time will be longer and
high-speed pulses (source-type transistor outputs) will not be output. If the
load current is above 0.1 A, the transistor will generate more heat and com-
ponents may be damaged.
Do not apply voltage in excess of the maximum switching capacity to an
output terminal. It may result in damage to the product or fire.
Specification
SECTION 2