90° Grind Plate; Slack Belt Grinding - Work Sharp KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 User Manual

90° GRIND PLATE
This feature can be used for multiple purposes such as, but not limited to,
chamfering edges, flattening a knife spine, creating a flat edge grind, etc.
Use light pressure. Let the abrasives do the work for you.

SLACK BELT GRINDING

The slack belt section of the Abrasive Belt can be used for, but not limited
to, radiusing edges and shaping knife handles, Use light pressure. Let the
abrasives do the work for you.
Notice:
grinding when the 90° grind
plate is in the lowest position.
10˚
15˚
KNIFE SPINE
KNIFE SPINE
Only to be used for
KNIFE HANDLE
1 1 | 9 0 ° G R I N D P L A T E