Grinding - Work Sharp KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 User Manual

GRINDING

Remove Sharpening Guide. Pull up firmly.
Ensure the Edge Guide is in the parked position and
that the Knife Sharpening Guide has been removed
before grinding.
Push Cassette Lock Release Lever to rotate cassette
to grind mode.
Use the P120 belt and speed 6 for light sharpening
and grinding tasks.
CAUTION: Loose items can
•
be caught in moving parts.
Keep your hair, clothing and
gloves away from moving
parts. Failure to follow this
warning could result in
moderate or minor injury.
NOTE: Tools such as these do not require
sharpening to a precise angle; just let the
belt conform to the edge of the tool. It will
take longer to restore an edge to severely
damaged tools.
BEST TECHNIQUES
Always clamp or fixture work piece before
grinding for optimum safety.
Use light pressure and let the tool do the work. Do not
overload the tool during grinding. Abrasive selection
and belt speed are already optimized.
Only use the tool grinding section of the belt.
2 2 | G R I N D I N G
TOOL GRINDING
SECTION