Table of Contents
Advertisement
PRUNING SHEARS
Remove Sharpening Guide. Pull up firmly.
Ensure the Edge Guide is in the grinding position.
Use the
6000
grit abrasive belt at speed 3 to hone the cutting blade.
X22
Use the
grit abrasive belt at speed 3 to sharpen a damaged or dull
cutting blade.
Hone the beveled side after sharpening a damaged or dull cutting blade.
Only sharpen the beveled side of the
cutting blade.
Place the Anvil Blade behind the belt
as shown and slowly pull the Cutting
Blade across the abrasive belt.
SHARPENING NOTES
KNIFE / TOOL
BEVELED SIDE
NOTES
ANVIL SIDE
2 3
|
P R U N I N G S H E A R S
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 and is the answer not in the manual?