Work Sharp KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 User Manual page 12

2. KNIFE SHARPENING GUIDE ADJUSTMENT
15° - 30° in 1/2° increments. Angle is measured
per side of the knife (ex. 20° per side equals a
40° inclusive edge angle). Align desired angle
with the indicator line on the guide.
3. SPEED CONTROL ADJUSTMENT
CONTINUOUS MOTOR RUN MODE:
directly above the speed controls to lock the motor on.
Use the Plus (+) and Minus (-) buttons to increase or decrease the speed of the
abrasive belt. SFM = Surface Feet Per Minute
• HIGHEST: 7 lights
• HIGH: 6 lights
• MED-HIGH: 5 lights
• MEDIUM: 4 lights
• MED-LOW: 3 lights
• LOW: 2 lights
• LOWEST: 1 light
4. BELT INFORMATION
BELT NAME
Extra-Coarse
Coarse
Medium
Fine
Extra-Fine
Abrasive belt dimensions: 3/4" x 12", *1/2" x 12"
Replacement belts and more grit selection available at: www.worksharptools.com
• Engineered abrasives are longer lasting and should meet your sharpening needs.
• Keep belts clean and dry for best performance and life.
• Belt grits are labeled on backing (µ=micron)
For reference, belts are equivalent to:
1 2 | G E T T I N G T O K N O W Y O U R K E N O N I O N S H A R P E N E R
Depress the Power Switch and press the button
2590 SFM
2340 SFM
2050 SFM
1770 SFM
1460 SFM
1190 SFM
850 SFM
GRIT COLOR
P120 RED
X65 DARK GREY
X22 LIGHT GREY
X4 WHITE
6000 PURPLE*
CONTINOUS RUN
GRINDING
SHAPING KNIVES
SHARPENING KNIVES
POWER OFF
APPLICATION
Extra-Coarse grit belt for tool sharpening and
knife repair.
Coarse grit belt for knife shaping.
Medium grit belt for knife sharpening.
Fine grit belt for honing knives and scissors.
Extra-Fine grit belt for serrations and gut hooks.
(P220) |
X65 X22
ANGLE INDICATOR
LINE
(P1000) | (P3000)
X4