Loop the next belt around
the Belt Guard first and then
around the Pulleys.
Release the Tensioner Lever.
Track the belt by rotating the
Tracking Knob to center the
Abrasive Belt over the Pulleys.
Clockwise moves the belt to
the left, counterclockwise
moves the belt to the right.
4. TOOL SETUP
Choose the pulley location for the desired amount of convex. Pull Convex Pulley
as indicated, move to desired position, push to secure in place.
•
HIGH CONVEX: Outdoor and camp knives
•
MEDIUM CONVEX: EDC and hunting knives
•
LOW CONVEX: Kitchen and small knives
WARNING!
•
Never adjust convex
pulley when unit is
powered on or belt
is moving.
Set the desired sharpening angle.
Rotate the Angle Adjustment Knob until the desired angle is set.
HIGH CONVEX
7
|
G E T T I N G T O K N O W Y O U R B L A D E G R I N D I N G A T TA C H M E N T
MEDIUM CONVEX
10˚
15˚
LOW CONVEX
Need help?
Do you have a question about the KEN ONION EDITION KNIFE & TOOL SHARPENER MK.2 and is the answer not in the manual?